What version is the G2 running? I believe there was an issue on v1.0 that was later fixed. Read up here: http://community.mimosa.co/t/a5-c5-speedtest-ceiling/1793/6
-Rob On Wed, Mar 8, 2017 at 9:21 PM, Ryan Ray <ryan...@gmail.com> wrote: > C5 is negotiating at 1G but the router is obviously only negotiating at > 100Mb. > > I don't see this issue on any G2's in routed mode or any G2's in passthru > with a 1g client behind it. > > On Wed, Mar 8, 2017 at 9:15 PM, Rory Conaway <r...@triadwireless.net> wrote: >> >> Are the ports negotiating at 1Gbps? I just checked the client we have and >> he has had peaks of over 40Mbps although 95% of his bandwidth is under >> 10Mbps. Turn it over to tech support and see what they say. >> >> Rory >> >> >> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rory Conaway >> Sent: Wednesday, March 8, 2017 10:10 PM >> To: af@afmug.com >> Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers >> >> >> >> Weird, haven’t seen it but I only have 1 customer with his own router >> behind a G2. I’m checking it now. >> >> >> >> Rory >> >> >> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray >> Sent: Wednesday, March 8, 2017 10:08 PM >> To: af@afmug.com >> Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers >> >> >> >> Yes. I can replicate it on multiple G2's, multiple 100Mb routers and >> cables and multiple site locations. >> >> >> >> >> >> On Wed, Mar 8, 2017 at 9:06 PM, Rory Conaway <r...@triadwireless.net> >> wrote: >> >> Ryan, something is wrong. Did you try a different G2 or cable? >> >> >> >> Rory >> >> >> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray >> Sent: Wednesday, March 8, 2017 9:42 PM >> To: af@afmug.com >> Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers >> >> >> >> It was an after need. They wanted to implement a system with their own >> router but needed internet right away. So I left a G2 and switched it into >> passthru after they were ready. >> >> >> >> On Wed, Mar 8, 2017 at 8:15 PM, Rory Conaway <r...@triadwireless.net> >> wrote: >> >> I’m sort of confused. Why are you using a G2 if you have your own router? >> >> >> >> Rory >> >> >> >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray >> Sent: Wednesday, March 8, 2017 8:04 PM >> To: af@afmug.com >> Subject: [AFMUG] Problem with Mimosa G2 & 100Mb routers >> >> >> >> Not sure if anyone else is deploying the Mimosa platform en-mass but came >> across a new issue today in case you're fighting with things. >> >> >> >> The issue: Client Router receives very poor download no matter what signal >> conditions are like. Download capped around 10Mb/s. Upload was unaffected. >> >> >> >> The equipment: >> >> A5 – 2.2.1 Version – GPS Synced >> >> C5 – 2.2.1 Version – GPS Synced >> >> G2 in passthru – 1.1.2 Version >> >> Client Router – Asus N600 >> >> >> >> The problem: >> >> G2 has an issue with 100Mb routers. Plugging in a 1Gb client into the >> passthrued G2 resulted in full speed. Plugging a 100Mb router caused the >> download to drop to 10Mb/s levels. >> >> >> >> >> >> The solution: >> >> >> >> Replace G2 with regular power supply, fixed issue. >> In C5 change the duplex from auto to 100MF, fixed issue while still using >> G2. >> >> >> >> >> >> > >