It's on 1.1.2 On Wed, Mar 8, 2017 at 9:26 PM, Rob Genovesi <r...@corp.coastside.net> wrote:
> What version is the G2 running? > > I believe there was an issue on v1.0 that was later fixed. Read up > here: http://community.mimosa.co/t/a5-c5-speedtest-ceiling/1793/6 > > -Rob > > > > On Wed, Mar 8, 2017 at 9:21 PM, Ryan Ray <ryan...@gmail.com> wrote: > > C5 is negotiating at 1G but the router is obviously only negotiating at > > 100Mb. > > > > I don't see this issue on any G2's in routed mode or any G2's in passthru > > with a 1g client behind it. > > > > On Wed, Mar 8, 2017 at 9:15 PM, Rory Conaway <r...@triadwireless.net> > wrote: > >> > >> Are the ports negotiating at 1Gbps? I just checked the client we have > and > >> he has had peaks of over 40Mbps although 95% of his bandwidth is under > >> 10Mbps. Turn it over to tech support and see what they say. > >> > >> Rory > >> > >> > >> > >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rory Conaway > >> Sent: Wednesday, March 8, 2017 10:10 PM > >> To: af@afmug.com > >> Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers > >> > >> > >> > >> Weird, haven’t seen it but I only have 1 customer with his own router > >> behind a G2. I’m checking it now. > >> > >> > >> > >> Rory > >> > >> > >> > >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray > >> Sent: Wednesday, March 8, 2017 10:08 PM > >> To: af@afmug.com > >> Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers > >> > >> > >> > >> Yes. I can replicate it on multiple G2's, multiple 100Mb routers and > >> cables and multiple site locations. > >> > >> > >> > >> > >> > >> On Wed, Mar 8, 2017 at 9:06 PM, Rory Conaway <r...@triadwireless.net> > >> wrote: > >> > >> Ryan, something is wrong. Did you try a different G2 or cable? > >> > >> > >> > >> Rory > >> > >> > >> > >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray > >> Sent: Wednesday, March 8, 2017 9:42 PM > >> To: af@afmug.com > >> Subject: Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers > >> > >> > >> > >> It was an after need. They wanted to implement a system with their own > >> router but needed internet right away. So I left a G2 and switched it > into > >> passthru after they were ready. > >> > >> > >> > >> On Wed, Mar 8, 2017 at 8:15 PM, Rory Conaway <r...@triadwireless.net> > >> wrote: > >> > >> I’m sort of confused. Why are you using a G2 if you have your own > router? > >> > >> > >> > >> Rory > >> > >> > >> > >> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Ray > >> Sent: Wednesday, March 8, 2017 8:04 PM > >> To: af@afmug.com > >> Subject: [AFMUG] Problem with Mimosa G2 & 100Mb routers > >> > >> > >> > >> Not sure if anyone else is deploying the Mimosa platform en-mass but > came > >> across a new issue today in case you're fighting with things. > >> > >> > >> > >> The issue: Client Router receives very poor download no matter what > signal > >> conditions are like. Download capped around 10Mb/s. Upload was > unaffected. > >> > >> > >> > >> The equipment: > >> > >> A5 – 2.2.1 Version – GPS Synced > >> > >> C5 – 2.2.1 Version – GPS Synced > >> > >> G2 in passthru – 1.1.2 Version > >> > >> Client Router – Asus N600 > >> > >> > >> > >> The problem: > >> > >> G2 has an issue with 100Mb routers. Plugging in a 1Gb client into the > >> passthrued G2 resulted in full speed. Plugging a 100Mb router caused the > >> download to drop to 10Mb/s levels. > >> > >> > >> > >> > >> > >> The solution: > >> > >> > >> > >> Replace G2 with regular power supply, fixed issue. > >> In C5 change the duplex from auto to 100MF, fixed issue while still > using > >> G2. > >> > >> > >> > >> > >> > >> > > > > >
