hmm, one does. one does not ----- Original Message ----- From: CBB - Jay Fuller To: af@afmug.com Sent: Thursday, June 15, 2017 8:29 PM Subject: Re: [AFMUG] Netonix/Mimosa compatibility.
That is not the case for our other five Mimosa radios Sent from my Verizon 4G LTE Smartphone ----- Reply message ----- From: "Faisal Imtiaz" <fai...@snappytelecom.net> To: <af@afmug.com> Subject: [AFMUG] Netonix/Mimosa compatibility. Date: Thu, Jun 15, 2017 7:44 PM >. Netonix still shows cable errors though a > standard cable tester shows if you are testing the cable with the radio plugged in, then this is normal.. Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- > From: "CBB - Jay Fuller" <par...@cyberbroadband.net> > To: af@afmug.com > Sent: Thursday, June 15, 2017 6:58:57 PM > Subject: Re: [AFMUG] Netonix/Mimosa compatibility. > At the moment it's two Mimosa radios at one tower and one radio at > another that have the issue. We replaced our Shireen Cat 5 with Shireen > Cat 6 and Shireen connectors and the link negotiation problem seems to > have gotten better but the Netonix still shows cable errors though a > standard cable tester shows continuity and correct pin out. I may > contact Netonix and see if they can give me a clue as to what problem > their unit is detecting. > > Bill Prince wrote: >> Have you just plugged into a laptop or anything besides the Netonix? >> We've had at least one situation with a bad port on a Netonix switch >> that had symptoms similar to this. >> >> bp >> <part15sbs{at}gmail{dot}com> >> >> On 6/15/2017 3:44 PM, Jay Weekley wrote: >>> We tried it on one radio of the four in question. >>> >>> Faisal Imtiaz wrote: >>>> hmm.. sounds like you have some other issue going on ... >>>> >>>> Faisal Imtiaz >>>> Snappy Internet & Telecom >>>> 7266 SW 48 Street >>>> Miami, FL 33155 >>>> Tel: 305 663 5518 x 232 >>>> >>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >>>> >>>> ----- Original Message ----- >>>>> From: "CBB - Jay Fuller" <par...@cyberbroadband.net> >>>>> To: af@afmug.com >>>>> Sent: Thursday, June 15, 2017 6:03:05 PM >>>>> Subject: Re: [AFMUG] Netonix/Mimosa compatibility. >>>>> We tried the Mimosa brick and it didn't help but that was prior to >>>>> trying Mimosa's suggestion of moving to Cat6 . We've tried locking >>>>> it to >>>>> 100 meg full duplex and it held a connection but I am not sure if we >>>>> tried 1 gig half. >>>>> >>>>> Faisal Imtiaz wrote: >>>>>> Here is what I would suggest. >>>>>> >>>>>> 1) Use the Mimosa Brick, for testing, and see if that fixes your >>>>>> issue >>>>>> if it does then consider, using a different port or 48VH >>>>>> power etc to see if the >>>>>> issue is on then netonix side. >>>>>> >>>>>> if you still have the same issue with Mimosa Brick then you >>>>>> know the problem is >>>>>> else ware. >>>>>> >>>>>> BWT.. if you lock both sides (Radio & Netonix) to 100meg full >>>>>> duplex or even 1G >>>>>> half duplex do they hold the connection ? >>>>>> >>>>>> Regards. >>>>>> >>>>>> Faisal Imtiaz >>>>>> Snappy Internet & Telecom >>>>>> 7266 SW 48 Street >>>>>> Miami, FL 33155 >>>>>> Tel: 305 663 5518 x 232 >>>>>> >>>>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >>>>>> >>>>>> ----- Original Message ----- >>>>>>> From: "CBB - Jay Fuller" <par...@cyberbroadband.net> >>>>>>> To: af@afmug.com >>>>>>> Sent: Thursday, June 15, 2017 5:06:16 PM >>>>>>> Subject: Re: [AFMUG] Netonix/Mimosa compatibility. >>>>>>> Oh, and no surge protector at the moment. >>>>>>> >>>>>>> Faisal Imtiaz wrote: >>>>>>>> have not seen that issue ... >>>>>>>> >>>>>>>> Are you using 48VH port ? or just 48V ? >>>>>>>> and is there a surge protector in the middle ? >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Faisal Imtiaz >>>>>>>> Snappy Internet & Telecom >>>>>>>> 7266 SW 48 Street >>>>>>>> Miami, FL 33155 >>>>>>>> Tel: 305 663 5518 x 232 >>>>>>>> >>>>>>>> Help-desk: (305)663-5518 Option 2 or Email: >>>>>>>> supp...@snappytelecom.net >>>>>>>> >>>>>>>> ----- Original Message ----- >>>>>>>>> From: "CBB - Jay Fuller" <par...@cyberbroadband.net> >>>>>>>>> To: af@afmug.com >>>>>>>>> Sent: Thursday, June 15, 2017 4:44:38 PM >>>>>>>>> Subject: [AFMUG] Netonix/Mimosa compatibility. >>>>>>>>> Has anyone experience a compatibility problem when using Mimosa >>>>>>>>> radios >>>>>>>>> with Netonix for power? We've got a problem with gigabit link >>>>>>>>> negotiation issues where link will alternate between a gig and >>>>>>>>> no link. >>>>>>>>> We've upgraded to Cat 6 and are still seeing the issue. >>>>>>>> --- >>>>>>>> This email has been checked for viruses by AVG. >>>>>>>> http://www.avg.com >>> >>