OK, so again, you do realize I have a whole product line for angle iron, right?
From: Steve Jones Sent: Thursday, April 19, 2018 1:43 PM To: af@afmug.com Subject: Re: [AFMUG] MTOW clamps no, this is for mounting to angle iron. I put a pipe inside for clamp grip On Thu, Apr 19, 2018 at 2:41 PM, <ch...@wbmfg.com> wrote: So you are adding an piece of angle iron to a round tower leg? I presume y’all know about these: https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/ From: Steve Jones Sent: Thursday, April 19, 2018 1:37 PM To: af@afmug.com Subject: Re: [AFMUG] MTOW clamps On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote: The M-TOW-P-48 is not an angle iron part. If that is what you ordered that is not what got shipped. -----Original Message----- From: Seth Mattinen Sent: Wednesday, April 18, 2018 8:24 PM To: af@afmug.com Subject: Re: [AFMUG] MTOW clamps On 4/18/18 7:16 PM, Chuck McCown wrote: The M-TOW products that are made for angle iron tower legs have a flat back clamp. But the others are still the curved clamp. We could have had a packing error in final assembly I suppose. Oh, then I got the wrong one, I've never seen the angle iron tower ones. Ordered from Streakwave. M-TOW-P-48