Our angle mounts also have the V notch that rests against the angle iron.
From: Adam Moffett Sent: Thursday, April 19, 2018 1:47 PM To: af@afmug.com Subject: Re: [AFMUG] MTOW clamps Other way around. Angled tower leg, he's backing the angle with a piece of pipe so he can't crush the angle. Using your bent clamp on the back so it goes against the pipe and the site pro piece on the front because it has a V-notch that will rest in the angle iron. ------ Original Message ------ From: ch...@wbmfg.com To: af@afmug.com Sent: 4/19/2018 3:41:24 PM Subject: Re: [AFMUG] MTOW clamps So you are adding an piece of angle iron to a round tower leg? I presume y’all know about these: https://www.mccowntech.com/product-category/tower-mounts-accessories/angle-iron-tower-leg-mounting-accessories/ From: Steve Jones Sent: Thursday, April 19, 2018 1:37 PM To: af@afmug.com Subject: Re: [AFMUG] MTOW clamps On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote: The M-TOW-P-48 is not an angle iron part. If that is what you ordered that is not what got shipped. -----Original Message----- From: Seth Mattinen Sent: Wednesday, April 18, 2018 8:24 PM To: af@afmug.com Subject: Re: [AFMUG] MTOW clamps On 4/18/18 7:16 PM, Chuck McCown wrote: The M-TOW products that are made for angle iron tower legs have a flat back clamp. But the others are still the curved clamp. We could have had a packing error in final assembly I suppose. Oh, then I got the wrong one, I've never seen the angle iron tower ones. Ordered from Streakwave. M-TOW-P-48
