I thought it was mcown tower. ;-)
-- bp part15sbs{at}gmail{dot}com On Thu, Apr 19, 2018 at 12:57 PM, <ch...@wbmfg.com> wrote: > Our angle mounts also have the V notch that rests against the angle iron. > > *From:* Adam Moffett > *Sent:* Thursday, April 19, 2018 1:47 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] MTOW clamps > > Other way around. Angled tower leg, he's backing the angle with a piece > of pipe so he can't crush the angle. Using your bent clamp on the back so > it goes against the pipe and the site pro piece on the front because it has > a V-notch that will rest in the angle iron. > > > ------ Original Message ------ > From: ch...@wbmfg.com > To: af@afmug.com > Sent: 4/19/2018 3:41:24 PM > Subject: Re: [AFMUG] MTOW clamps > > > So you are adding an piece of angle iron to a round tower leg? > I presume y’all know about these: > https://www.mccowntech.com/product-category/tower-mounts- > accessories/angle-iron-tower-leg-mounting-accessories/ > > *From:* Steve Jones > *Sent:* Thursday, April 19, 2018 1:37 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] MTOW clamps > > > > > On Thu, Apr 19, 2018 at 9:54 AM, <ch...@wbmfg.com> wrote: > >> The M-TOW-P-48 is not an angle iron part. If that is what you ordered >> that is not what got shipped. >> >> -----Original Message----- From: Seth Mattinen >> Sent: Wednesday, April 18, 2018 8:24 PM >> To: af@afmug.com >> Subject: Re: [AFMUG] MTOW clamps >> >> On 4/18/18 7:16 PM, Chuck McCown wrote: >> >>> The M-TOW products that are made for angle iron tower legs have a flat >>> back clamp. But the others are still the curved clamp. We could have had >>> a packing error in final assembly I suppose. >>> >> >> >> Oh, then I got the wrong one, I've never seen the angle iron tower ones. >> Ordered from Streakwave. M-TOW-P-48 >> > > >