Chris,
Indoors or out doors? How many satellites were in the solution?
The first time you turn on a GPS receiver in a new location it
sometimes takes longer to lock up than if it is close to where it was
last used.
Try the Telemetrum with just the RRC2+ to see if you can eliminate
it as the problem source of the problem.
Terry
On 7/12/2015 12:43 PM, Chris Attebery wrote:
Hey guys,
I finished my altimeter bay integration last night. I fired up the
Telemetrum 2.0 by itself and it took 5-10 minutes for it to get GPS
lock. I turned it off and then turned on my camera and Missile Works
RRC2+ before turning on the Telemetrum on this time I let it sit for 6
minutes and it never found any satellites and never got a lock.
I have the camera board shielded but the camera module is unshielded
and near the Telemetrum. I've been told that writing to the SD card on
the camera produces a lot of noise and can interfere with GPS signals.
Any suggestions?
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
