I start with a taper.debug with debug-level 3: taper: pid 27077 ruid 87 euid 87 version 3.5: start at Fri Nov 10 15:30:49 2017 taper: Arguments: daily --storage archive --log-filename /var/lib/amanda/daily/log.20171110153047.0 taper: reading config file /etc/amanda/daily/amanda.conf taper: pid 27077 ruid 87 euid 87 version 3.5: rename at Fri Nov 10 15:30:49 2017 taper: chg-robot: using statefile '/var/spool/amanda/amanda/chg-robot-dev-sg3' taper: event: loop: enter: nonblockg=0, eh=(nil) taper: taper/driver << START-TAPER taper0 worker0-0 archive 20171110153047 taper: Amanda::Taper::Scribe: starting taper: Amanda::Taper::Scan::traditional stage 1: search for oldest reusable volume taper: Amanda::Taper::Scan::traditional oldest reusable volume is 'CMR908' taper: Amanda::Taper::Scan::traditional stage 1: searching oldest reusable volume 'CMR908' taper: invoking /usr/sbin/mtx -f /dev/sg3 status taper: mtx: Storage Changer /dev/sg3:1 Drives, 8 Slots ( 0 Import/Export ) taper: mtx: Data Transfer Element 0:Full (Storage Element 3 Loaded):VolumeTag = CMR863L6 taper: mtx: Storage Element 1:Full :VolumeTag=CMR865L6 taper: mtx: Storage Element 2:Full :VolumeTag=CMR867L6 taper: mtx: Storage Element 3:Empty taper: mtx: Storage Element 4:Full :VolumeTag=CMR864L6 taper: mtx: Storage Element 5:Full :VolumeTag=CMR866L6 taper: mtx: Storage Element 6:Empty taper: mtx: Storage Element 7:Empty taper: mtx: Storage Element 8:Empty taper: robot: updating state taper: robot: loading label 'CMR908' taper: new Amanda::Changer::Error: type='failed', reason='notfound', message='label 'CMR908' not recognized or not found' taper: label 'CMR908' not recognized or not found taper: Amanda::Taper::Scan::traditional oldest reusable volume not found taper: Amanda::Taper::Scan::traditional stage 2: scan for any reusable volume taper: robot: too early for another 'status' invocation taper: robot: requested volume is already in drive 0 taper: robot: polling 'tape:/dev/nst0' to see if it's ready taper: Device is in variable block size taper: robot: setting current slot to 3 taper: Slot 3 with label ARC863 is usable taper: Amanda::Taper::Scan::traditional result: 'ARC863' on tape:/dev/nst0 slot 3, mode 2 taper: taper/driver >> TAPER-OK worker0-0 ALLOW-TAKE-SCRIBE-FROM taper: taper/driver << CLOSE-VOLUME worker0-0 taper: taper/driver >> CLOSED-VOLUME worker0-0 taper: taper/driver << QUIT taper: Amanda::Taper::Scribe: quitting taper: robot: too early for another 'status' invocation taper: ru_utime : 0 taper: ru_stime : 0 taper: ru_maxrss : 37676 taper: ru_ixrss : 0 taper: ru_idrss : 0 taper: ru_isrss : 0 taper: ru_minflt : 8241 taper: ru_majflt : 2 taper: ru_nswap : 0 taper: ru_inblock : 32 taper: ru_oublock : 48 taper: ru_msgsnd : 0 taper: ru_msgrcv : 0 taper: ru_nsignals: 0 taper: ru_nvcsw : 17 taper: ru_nivcsw : 4 taper: pid 27077 finish time Fri Nov 10 15:30:49 2017
plus the amflush.debug: amflush: pid 27074 ruid 87 euid 87 version 3.5: start at Fri Nov 10 15:30:47 2017 amflush: Arguments: daily samba.gigabit.net veeam_backup windows_vss smb-Einkauf smb-Homes smb-Leitungsteam smb-Marketing smb-Messprotokolle amflush: reading config file /etc/amanda/daily/amanda.conf amflush: pid 27074 ruid 87 euid 87 version 3.5: rename at Fri Nov 10 15:30:47 2017 amflush: beginning trace log: /var/lib/amanda/daily/log.20171110153047.0 amflush: beginning amdump log amflush: /usr/lib64/perl5/vendor_perl/5.24.3/Amanda/Amflush.pm:102:info:2200006 The timestamp is '20171110153047' amflush: /usr/lib64/perl5/vendor_perl/5.24.3/Amanda/Amflush.pm:108:info:2200001 The amdump trace file is '/var/lib/amanda/daily/amdump.20171110153047' amflush: /usr/lib64/perl5/vendor_perl/5.24.3/Amanda/Amflush.pm:114:info:2200000 The log file is '/var/lib/amanda/daily/log.20171110153047.0' amflush: driver: 27076 amflush: exec: /usr/libexec/amanda/driver daily nodump --no-vault --log-filename /var/lib/amanda/daily/log.20171110153047.0 amflush: flushing /mnt/backup/amhold/daily/20171108204306/samba.gigabit.net.smb-Einkauf.0 [..] amflush: driver finished with exit code 0 amflush: running amreport amflush: Running /usr/sbin/amreport daily --from-amdump -l /var/lib/amanda/daily/log.20171110153047.0 amflush: /usr/sbin/amreport exited with code 0 amflush: renaming amdump log and trimming old amdump logs (beyond tapecycle+2) amflush: Amflush exiting with code 0 amflush: exiting with code 0
