Thanks John: I thought I had checked everything several times, but will open the sound card file and look that over to be sure it is not doing something weird, Bernie ----- Original Message ----- From: "John Coleman" <j...@pctechref.com> To: "'Discussion of AM Radio in the Amateur Service'" <amradio@mailman.qth.net> Sent: Wednesday, February 10, 2010 2:17 PM Subject: Re: [AMRadio] sdr-iq
> Hey Bernie: > This is just a suggestion of what you might check into. I am not > familiar with the radio but have heard other brick radios that sound > pretty > good. Concerning the computer, it is possible, although you would not > generally want it, to listen to the recorded sound while recording and at > the same time listen to the input. Obviously the recorded audio will be > slightly delayed from the input causing an echo sound. Most sound cards > will record at the same time they are playing something, and have a > separate > set of controls for recording than for playback however both sets may have > a > listening level control. > > Just a suggestion on something to check. > John, WA5BXO > > -----Original Message----- > From: amradio-boun...@mailman.qth.net > [mailto:amradio-boun...@mailman.qth.net] On Behalf Of Bernie Doran > Sent: Wednesday, February 10, 2010 12:03 PM > To: Discussion of AM Radio in the Amateur Service > Subject: [AMRadio] sdr-iq > > I purchased an SDR-iQ about five weeks ago and while it performs great in > a > number of areas it seems to be poor in the audio demodulation, at least on > AM, I am getting what sounds like a low level echo and a general > artificial > > quality of sound, my 75A2 sounds much better and that certainly is not > good > quality audio. it is difficult to copy a moderate level AM signal. the > computer plays DVDs and CDs fine and sounds good. I talked to the store > that > > I purchased it from and they said they have heard this before and that I > should not expect it to sound like a VT receiver!!!!! that was a shock, > what did I buy it for?. computer is a single core 2.8 gig, it shows it > running at about %75. any one else use these things? or have experience > with > > the Flex 5000a? Bernie > > > ______________________________________________________________ > Our Main Website: http://www.amfone.net > AMRadio mailing list > Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ > List Rules (must read!): http://w5ami.net/amradiofaq.html > List Home: http://mailman.qth.net/mailman/listinfo/amradio > Post: AMRadio@mailman.qth.net > To unsubscribe, send an email to amradio-requ...@mailman.qth.net with > the word unsubscribe in the message body. > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Our Main Website: http://www.amfone.net > AMRadio mailing list > Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ > List Rules (must read!): http://w5ami.net/amradiofaq.html > List Home: http://mailman.qth.net/mailman/listinfo/amradio > Post: AMRadio@mailman.qth.net > To unsubscribe, send an email to amradio-requ...@mailman.qth.net with > the word unsubscribe in the message body. > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
