Hi Nemik I'm running over the libnfc code. I can see these 4 files to be prominent for communication with SE
phHciNfc_CE_A.c phHciNfc_CE_B.c I am thinking the above two might be used for R/W into SE from App Processor. And the below two is used for communication between NFC Controller and SE. phHciNfc_SWP.c phHciNfc_WI.c Please go through these files and let me know if I'm in right path. Regards, Ajith On Mon, Jan 10, 2011 at 11:44 AM, nemik <ne...@nemik.net> wrote: > Ajith, > > According to > http://discussion.forum.nokia.com/forum/showthread.php?199442-6212-device-how-to-work-with-the-secure-element > the CN072 is a secure element in the Smart MX family. I'm not sure the > same one is in the Nexus S, but I presume the one in there is at least > very similar. > > Here is the info on it: > http://www.nxp.com/acrobat_download2/other/identification/SFS107710.pdf > > I'm still trying to figure out how to get access to it as well, for > reading or writing. I doubt there are any specific commands for it > though, it just takes regular commands over ISO14443 just like other > MiFare cards. > > On Jan 9, 11:31 pm, Ajith Kamath <sjce.aj...@gmail.com> wrote: > > Hi Nemik > > > > * I have small doubt with current implementation. Is SmartMX a Secure > > Element ?If so can you give me examples? > > * I have checked libnfc-nxp , enabling P2P parameter was at > phnfcconfig.h. > > what needs to be done to enable Secure element? > > what are MifarePlus, Desfire, Topaz . Is it a Card type or Secure > Element? > > > > * Also where is the general read-write methods for entry of Secure > element. > > All I can see is phLibNfc_SE.c is methods for getting list of secured > > element, selecting secure element, deselecting. > > * But method for exchange of data is not present. Can you tell me where > can > > I find this? > > > > * In libnfc-nxp There are files like phFriNfc_NdefMap.c, > > phFriNfc_MifareULMap.c, phFriNfc_TopazMap.c, phFriNfc_TopazDynamicMap.c, > > phFriNfc_DesfireMap.c, phFriNfc_FelicaMap.c. > > Can you tell me what these files are used for. The current comments in > the > > file do not provide sufficient information > > > > * I am trying to use Wired Mode, Hence phHciNfc_WI.c will be used to > > communicate between Controller and Secure element right? > > > > Please advice. > > > > Regards, > > Ajith > > > > Hi > > > > > > > > > > > > > > > > On Sun, Jan 9, 2011 at 1:00 AM, nemik <ne...@nemik.net> wrote: > > > I was able to enable a secure element the other day by messing around > > > with this external/libnfc-nxp library. I enabled SMX (SmartMX) in the > > > config headers, and upon booting and monitoring `adb logcat` during > > > boot I saw 1 secure elements (a SmartMX one) had been enabled. I was > > > then able to change the mode in NfcService.java to card emulation > > > mode. > > > > > The Nexus S is now emulating a MiFare Classic 4k card. However, I am > > > not able to read sectors from the card directly. I've been trying to > > > use the micmd tool to do that but things act pretty strangely. For > > > example, I tried to read block 0 and micmd tells me "Could not read > > > the data block! Tag halted, reconnecting..." but what's even stranger > > > is that at that point, 'adb logcat' shuts itself off. As if that read > > > command somehow interfered with USB or logging? > > > However trying `a` commands to authenticate in micmd always works for > > > some reason and it'll even pretent to write and persist data to > > > blocks; but of course that data never actually gets persisted to the > > > emulated card. Maybe this is a bug in micmd? > > > > > Does anyone know if the Nexus S hardware (or its PN544 NFC chipset) > > > even contains a hardware secure element like SmartMX? I tried also > > > enabling UICC but that didn't seem to work at all and NFC service > > > wouldn't even start in that case. Plus my SIM card is MANY years old > > > and not sure it'd even work... > > > > > Either way, I used libnfc.org's `nfc-mfclassic` tool to dump out the > > > contents of that emulated 4k card. It is here: > > >http://pastebin.com/zKZ2ELcw > > > > > Seems to be entirely blank which is why I'm wondering if these aren't > > > some default values it would spit out anyway even if no SmartMX module > > > existed? > > > > > If anyone has any more insights into this, I'd be very happy to hear > > > them. > > > > > -Nemanja > > > > > On Dec 19 2010, 7:26 pm, nemik <ne...@nemik.net> wrote: > > > > Dominik, > > > > > > Yea, that's right. All it does currently is read; at least via the > > > > Java API. If you look at the kernel source though, a bunch of ifdefs > > > > which allow for emulation were all disabled. So full compliance with > > > > theNFCstandard will have to wait for a future kernel release. > > > > > > On Dec 7, 5:42 am, Gruntz Dominik <dominik.gru...@fhnw.ch> wrote: > > > > > > > Hi everyone, > > > > > > > Do I see it right, that the Android 2.3NFCAPI does not provide > > > functionality to access a secure element? A secure element is a > smartcard > > > connected to theNFCcontroller, i.e. a secure storage in the device, > either > > > embedded in the mobile phone, on the SIM card or on a SD card. > > > > > > > With JavaME access to the secure element was provided with JSR177 > which > > > supported the communication with smart card applications usind APDU > > > commands. I have not seen comparable functionality in package > android.nfc. > > > > > > > Thanks for any hints > > > > > Dominik > > > > > -- > > > You received this message because you are subscribed to the Google > > > Groups "Android Developers" group. > > > To post to this group, send email to > android-developers@googlegroups.com > > > To unsubscribe from this group, send email to > > > android-developers+unsubscr...@googlegroups.com<android-developers%2bunsubscr...@googlegroups.com><android-developers%2Bunsubs > cr...@googlegroups.com> > > > For more options, visit this group at > > >http://groups.google.com/group/android-developers?hl=en > > -- > You received this message because you are subscribed to the Google > Groups "Android Developers" group. > To post to this group, send email to android-developers@googlegroups.com > To unsubscribe from this group, send email to > android-developers+unsubscr...@googlegroups.com<android-developers%2bunsubscr...@googlegroups.com> > For more options, visit this group at > http://groups.google.com/group/android-developers?hl=en > -- You received this message because you are subscribed to the Google Groups "Android Developers" group. To post to this group, send email to android-developers@googlegroups.com To unsubscribe from this group, send email to android-developers+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/android-developers?hl=en
