More then likely when you plugged in your USB cable it caused the battery to start charging which will wake up the device.
If you report a binary from the prox sensor make sure the sensor HAL converts this to millimeters. Dan On Apr 19, 3:29 pm, jagan <402ja...@gmail.com> wrote: > Hi. > > With a reff. of device/htc/passion-common/ > I am able to port p-sensor on my device. > > I am testing with calling my device to another device, after receiving i put > my device into my ear. > screen is OFF, while removing screen ON.. upto here ok. > > when i do the same thing in multiple times, at one instance while i am > putting my device into my ear, > it's going OFF, while removing it's screen is not turn back to ON. > but when i connect my usb cable, it's turn ON. > > What is the relation between p-sensor vs USB here.? > > I am changing my p-sensor driver that supports input subsystem by setting > params as > input_set_abs_params(input_dev, ABS_DISTANCE, 0, 1, 0, 0);. > > Is the above setting is correct for Proximity Sensor? > > Please correct me if any thing i am setting wrong. > > Please let me know if any inputs on this issue.? > > Thanks, > Jagan > > > > > > > > On Mon, Apr 18, 2011 at 6:40 PM, jagan <402ja...@gmail.com> wrote: > > Hi. > > > As the newly added sensor framework layer in GB. > > > we may need to change you HAL. > > > For reff. HAL see device/htc/passion-common/ > > libsensors > > > Jagan. > > > On Mon, Apr 18, 2011 at 6:04 PM, Aditya <aditya.s.mukher...@gmail.com>wrote: > > >> Dan, > >> I had the exact same problem, and my HAL (Hardware Access Layer) was had > >> a different name. Took me a while to figure it out. It would be a good idea > >> to submit in the the exceptions for this. > >> -Aditya > > >> On Sun, Apr 17, 2011 at 9:39 AM, DanM <murpd...@gmail.com> wrote: > > >>> I assume you are checking the logcat log and not the kernel log? > > >>> If you are checking logcat and don't see that your HAL is started make > >>> sure your sensor HAL .so has the correct name > >>> or else Android will not find the HAL and load it > > >>> Dan > > >>> On Apr 16, 8:40 am, jagan <402ja...@gmail.com> wrote: > >>> > I got the sensor boot logs for drivers, > >>> > but while testing any sensor i didn't get any logs from HAL. > > >>> > Jagan > > >>> > On Sat, Apr 16, 2011 at 5:15 PM, DanM <murpd...@gmail.com> wrote: > >>> > > Is your sensor library being loaded at boot? > > >>> > > Maybe put some log messages in your HAL and first verify that the > >>> > > sensor library initialized. > >>> > > Are you sure that the drivers are producing data? > > >>> > > Dan > > >>> > > On Apr 15, 11:53 pm, Luo Chunbo <lu...@paragonfmc.com> wrote: > >>> > > > There framework for sensors are changed in Gingerbread. > > >>> > > > And and think you can refer device/htc/passion-common/libsensors > >>> > > > or device/samsung/crespo/libsensors > > >>> > > > There are some sample code of sensors in these directories. > > >>> > > > Thanks > >>> > > > Chunbo > > >>> > > > On 04/15/2011 08:43 PM, jagan wrote: > > >>> > > > > Hi All, > > >>> > > > > I am upgrading my android device[with qualcomm chipset] into > >>> > > > > Gingerbread. > > >>> > > > > I am facing a problem with All my sensors are not working on > >>> device. > > >>> > > > > I ported: > >>> > > > > ----------- > >>> > > > > => sensor drivers in kernel [i got the boot up sensor init logs] > >>> > > > > => my HAL sensor daemon [having all sensor operations from user > >>> space > >>> > > > > to call driver code] > > >>> > > > > With the above changes my sensors are not working. > > >>> > > > > As per my analysis there is a new sensorservice layer is added in > >>> > > > > Gingerbread. > > >>> > > > > Is there any way to change my HAL, to support new sensorservice > >>> added > >>> > > > > by GB. > > >>> > > > > Please tell me any one how to add my sensor HAL to Gingerbread. > > >>> > > > > Thank you. > >>> > > > > Jagan > > >>> > > -- > >>> > > unsubscribe: android-kernel+unsubscr...@googlegroups.com > >>> > > website:http://groups.google.com/group/android-kernel > > >>> -- > >>> unsubscribe: android-kernel+unsubscr...@googlegroups.com > >>> website:http://groups.google.com/group/android-kernel > > >> -- > >> Aditya Mukherjee > >> Rutgers University > >> Department Of Computer Science > > >> -- > >> unsubscribe: android-kernel+unsubscr...@googlegroups.com > >> website:http://groups.google.com/group/android-kernel -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel