Hi Dan, I didn't get you what you explain.
Could you please Elaborate. Jagan. On Wed, Apr 20, 2011 at 8:11 PM, DanM <murpd...@gmail.com> wrote: > More then likely when you plugged in your USB cable it caused the > battery to start charging which will wake up the device. > > If you report a binary from the prox sensor make sure the sensor HAL > converts this to millimeters. > > Dan > > On Apr 19, 3:29 pm, jagan <402ja...@gmail.com> wrote: > > Hi. > > > > With a reff. of device/htc/passion-common/ > > I am able to port p-sensor on my device. > > > > I am testing with calling my device to another device, after receiving i > put > > my device into my ear. > > screen is OFF, while removing screen ON.. upto here ok. > > > > when i do the same thing in multiple times, at one instance while i am > > putting my device into my ear, > > it's going OFF, while removing it's screen is not turn back to ON. > > but when i connect my usb cable, it's turn ON. > > > > What is the relation between p-sensor vs USB here.? > > > > I am changing my p-sensor driver that supports input subsystem by setting > > params as > > input_set_abs_params(input_dev, ABS_DISTANCE, 0, 1, 0, 0);. > > > > Is the above setting is correct for Proximity Sensor? > > > > Please correct me if any thing i am setting wrong. > > > > Please let me know if any inputs on this issue.? > > > > Thanks, > > Jagan > > > > > > > > > > > > > > > > On Mon, Apr 18, 2011 at 6:40 PM, jagan <402ja...@gmail.com> wrote: > > > Hi. > > > > > As the newly added sensor framework layer in GB. > > > > > we may need to change you HAL. > > > > > For reff. HAL see device/htc/passion-common/ > > > libsensors > > > > > Jagan. > > > > > On Mon, Apr 18, 2011 at 6:04 PM, Aditya <aditya.s.mukher...@gmail.com > >wrote: > > > > >> Dan, > > >> I had the exact same problem, and my HAL (Hardware Access Layer) was > had > > >> a different name. Took me a while to figure it out. It would be a good > idea > > >> to submit in the the exceptions for this. > > >> -Aditya > > > > >> On Sun, Apr 17, 2011 at 9:39 AM, DanM <murpd...@gmail.com> wrote: > > > > >>> I assume you are checking the logcat log and not the kernel log? > > > > >>> If you are checking logcat and don't see that your HAL is started > make > > >>> sure your sensor HAL .so has the correct name > > >>> or else Android will not find the HAL and load it > > > > >>> Dan > > > > >>> On Apr 16, 8:40 am, jagan <402ja...@gmail.com> wrote: > > >>> > I got the sensor boot logs for drivers, > > >>> > but while testing any sensor i didn't get any logs from HAL. > > > > >>> > Jagan > > > > >>> > On Sat, Apr 16, 2011 at 5:15 PM, DanM <murpd...@gmail.com> wrote: > > >>> > > Is your sensor library being loaded at boot? > > > > >>> > > Maybe put some log messages in your HAL and first verify that the > > >>> > > sensor library initialized. > > >>> > > Are you sure that the drivers are producing data? > > > > >>> > > Dan > > > > >>> > > On Apr 15, 11:53 pm, Luo Chunbo <lu...@paragonfmc.com> wrote: > > >>> > > > There framework for sensors are changed in Gingerbread. > > > > >>> > > > And and think you can refer > device/htc/passion-common/libsensors > > >>> > > > or device/samsung/crespo/libsensors > > > > >>> > > > There are some sample code of sensors in these directories. > > > > >>> > > > Thanks > > >>> > > > Chunbo > > > > >>> > > > On 04/15/2011 08:43 PM, jagan wrote: > > > > >>> > > > > Hi All, > > > > >>> > > > > I am upgrading my android device[with qualcomm chipset] into > > >>> > > > > Gingerbread. > > > > >>> > > > > I am facing a problem with All my sensors are not working on > > >>> device. > > > > >>> > > > > I ported: > > >>> > > > > ----------- > > >>> > > > > => sensor drivers in kernel [i got the boot up sensor init > logs] > > >>> > > > > => my HAL sensor daemon [having all sensor operations from > user > > >>> space > > >>> > > > > to call driver code] > > > > >>> > > > > With the above changes my sensors are not working. > > > > >>> > > > > As per my analysis there is a new sensorservice layer is > added in > > >>> > > > > Gingerbread. > > > > >>> > > > > Is there any way to change my HAL, to support new > sensorservice > > >>> added > > >>> > > > > by GB. > > > > >>> > > > > Please tell me any one how to add my sensor HAL to > Gingerbread. > > > > >>> > > > > Thank you. > > >>> > > > > Jagan > > > > >>> > > -- > > >>> > > unsubscribe: android-kernel+unsubscr...@googlegroups.com > > >>> > > website:http://groups.google.com/group/android-kernel > > > > >>> -- > > >>> unsubscribe: android-kernel+unsubscr...@googlegroups.com > > >>> website:http://groups.google.com/group/android-kernel > > > > >> -- > > >> Aditya Mukherjee > > >> Rutgers University > > >> Department Of Computer Science > > > > >> -- > > >> unsubscribe: android-kernel+unsubscr...@googlegroups.com > > >> website:http://groups.google.com/group/android-kernel > > -- > unsubscribe: android-kernel+unsubscr...@googlegroups.com > website: http://groups.google.com/group/android-kernel > -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel