I also tried to flash this kexecboot with an old updater (r20). But the same occured.
2010/4/14 Guilhem Bonnefille <[email protected]>: > 2010/4/14 Yuri Bushmelev <[email protected]>: >>> As I reported, I tried this kexec, but installation/flash process >>> failed. Since this failure, my system was no more able to boot. I need >>> to reinstall/reflash the previous kexecboot. >> >> Can you provide more info on this? What steps are you doing and where is >> installation fails? > > Yes, sure. Here are the steps I followed. > > * uncompress installkit > * copy updater.sh and zImage to SD card > * rename zImage to zImage.bin > * insert SD card > * unpower and repower the zaurus > * OK button + power on > * Select entry 4 > * Select SD > * Confirm > > Then, the install go well, but the zaurus freeze. The screen contains: > > --- Universal Zaurus Updater r24 --- > MODEL: SL-C700 (c7x0) > > 0% 100% > ........... > --- Finish! --- > Rebooting > INIT: Switching to runlevel: 6 > INIT: Sending processes the TERM signal > Rebooting the system... > > > Then, the cursor blink 5 seconds and the zaurus freeze: > - screen stays as previous > - power LED switch off > - screen backlight switch off > > Hope that help. > -- > Guilhem BONNEFILLE > -=- JID: [email protected] MSN: [email protected] > -=- mailto:[email protected] > -=- http://nathguil.free.fr/ > -- Guilhem BONNEFILLE -=- JID: [email protected] MSN: [email protected] -=- mailto:[email protected] -=- http://nathguil.free.fr/ _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
