On Wed, November 23, 2005 7:21, Tzafrir Cohen said: > On Tue, Nov 22, 2005 at 09:20:23PM +0100, Francesco Peeters wrote: >> I have seen several claims that it can be done: Multiple HFC-PCI cards >> running both BRI_CPE_PTMP and BRI_NET_PTMP simultaneously, but *nobody* >> has been able yet to tell me the exact setup to make it work... >> >> My asterisk server breaks as soon as I turn one of the two cards in to >> an >> NT card, which I suspect is an issue in the (Florz-patched) BriStuffed >> chan_zap.so module, but as my cards aren't original Junghanns', they >> obviously aren't supported by Junghanns... >> (ZapHFC btw shows both cards active, one as TE Master, the other as NT >> slave, so that seems to be OK! I therefore doubt it is the Florz patch!) > > And you're very scarse on details here. How about your zaptel.conf and > the relevant prts of your zapata.conf? >
I had those in previous posts to which nobody responded... I'll repeat below! > Also: if you want just one of the cards in NT mode and the other > in TE mode, how can you be sure which one os the first and which is the > second? > 1) Put in both cards 2) Activate only the first in TE mode 3) Test which one responds with D-channel up/down messages when connected to the PSTN 4) The other one is the second one, which will be running in NT mode... ;-) > -- > Tzafrir Cohen | [EMAIL PROTECTED] | VIM is ---- zaptel.conf ---- # hfc-s pci a span definition # most of the values should be bogus because we are not really zaptel loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6 ---- end of zaptel.conf ---- ---- zapata.conf ---- ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; language=nl ; ; Default context ; ; switchtype = euroisdn rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 nationalprefix = 0 internationalprefix = 00 faxdetect=incoming group=1 callgroup=1 pickupgroup=1 ; p2mp TE mode ;signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 echocancel=yes echotraining = 100 echocancelwhenbridged=yes signalling = bri_cpe_ptmp immediate=no overlapdial=yes group = 1,2,3,4 callgroup=1,2,3,4 pickupgroup=1,2,3,4 context=from-pstn channel => 1-2 signalling = bri_net_ptmp ;signalling = pri_net_ptmp immediate=no overlapdial=yes group = 11,12,13,14 callgroup=11,12,13,14 pickupgroup=11,12,13,14 context=ext-local channel => 4-5 ;Include genzaptelconf configs #include zapata-auto.conf ;Include AMP configs #include zapata_additional.conf ---- end of zapata.conf ---- -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users