What do you mean does not support? I mean, it connected to the system fine and can place and receive calls.
As far a legal issues, that would figure. There's such a tight lock around their phones and internet system it's crazy. Everything there is overpriced and they try to control/put limits on everything. VOIP would definately destroy their hold. I didn't intend on using this system for business use, just personal use as 9/10 of my large family resides in Australia. Ohh well, I guess I better disconnect the thing. Especially if I can't fix the echo issue. ----- Original Message ----- From: "Adam Goryachev" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 20, 2004 8:20 PM Subject: Re: [Asterisk-Users] Echo on a PRI > On Wed, 2004-07-21 at 02:03, Deon Rodden wrote: > > I installed a server in Australia with a Wildcard X100P in it. From my > > server in the U.S, I pushed a call via IAX to the server in Australia which > > then pushed it out that card. Severe echo, only I could hear it though. The > > remote side heard nothing. Definately been reading up on this echoing issue. > > Then I guessed you missed a couple of facts (technical ones & legal) > > A) Australia uses a different impedance on analogue lines, which the X10xP > doesn't support. However, if you use the TDM01B card, it will support this, > and there are recent cvs changes to support module loadtime options to set these. > > B) Legally speaking (AFAIK) you are not permitted to connect non-approved > equipment to a telephone line, of which the X10xP is not approved and probably > never will be. > > Regards, > Adam > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users