Interesting... trixbox is running under vmware esx 3 with 2 virtual CPUs and 256MB ram allocated.
I'm quite willing to play with the kernel to try and address this... any good pointers as to what might be the specific issue? The esx kernel is 2.4.21-37.0.2.ELvmnix The CentOS kernel is 2.6.9-34.0.2.ELsmp -Adam On 3/3/07, Sacha Panasuik <[EMAIL PROTECTED]> wrote:
The usual things to look at: 1) Type of cpu and cpu specific settings in the bios 2) Ensure no irq conflicts 3) Some motherboard chipsets are not especially asterisk friendly Also, there have been reports of problems like this running with some combinations of vmware and trixbox (mostly to do with the kernel being run). It can sometimes be a little tricky to find an effective combination of hardware and kernel version and ??? Version that all get along. But a basic asterisk system as you have described does not need crazy new hardware - I ran very well on a celeron 350 Mhz with a similar setup. Sent from my BlackBerry device on the Rogers Wireless Network -----Original Message----- From: "Adam Ronthal" <[EMAIL PROTECTED]> Date: Fri, 2 Mar 2007 18:21:02 To:[email protected] Subject: [on-asterisk] recording and playback sound poor quality Hi folks - I'm fairly new to Asterisk/Trixbox, but learning more daily... my setup is as follows: Trixbox 2 - FreePBX Administration 2.2.0rc3 - Asterisk 1.2.13 svn rev 47264 One active trunk configured with les.net for DID and termination/origination One grandstream budgetone 200 SIP phone My inbound and outbound calls are all good and working perfectly... however, when accessing the Asterisk internal recording (e.g. voicemail, IVR, etc...) the sound quality on the line is poor with lots of crackly and static. I'm running with fairly close to default settings, and have not played with different codecs yet. The host system appears to have adequate resources -- no swapping, no heavy load on the CPU -- and the LAN is 100-Base-T throughout. Any ideas? Looking for some basic guidance.... Thanks, -Adam --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
