On Dec 3, 2007 12:04 AM, Jagadish <[EMAIL PROTECTED]> wrote: > Hi, > > Please find attached messages during ath5k driver initialization. The > logs includes output of the following commands. > 1) modprobe ath5k > 2) ifconfig ath0 up > Since I removed the configuration files given by suse distribution in > /etc/sysconfig/network directory, I am getting "No configuration found > for wmaster0" in the attached logs. I think that will not be a problem. > Please tell me what might be the problem. > > thanks, > Jagadish > > > >>> These messages do not indicate to me that you have brought the > >>> interface up. Please bring up the interface first. > >>> > >>> ip link set wlan0 up > >>> > >>> or the old man way to do it: > >>> > >>> ifconfig wlan0 up > >>> > >>> Then you should be able to scan. > >>> > >>> Luis > >>> > >>> > > > Dec 3 10:24:37 linux-lf5g kernel: [ 114.512300] ACPI: PCI Interrupt > 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 18 > Dec 3 10:24:37 linux-lf5g kernel: [ 114.602934] phy1: Selected rate control > algorithm 'simple' > Dec 3 10:24:37 linux-lf5g kernel: [ 114.604449] ath5k_pci 0000:05:00.0: > Atheros AR5213A chip found (MAC: 0x79, PHY: 0x45) > Dec 3 10:24:37 linux-lf5g kernel: [ 114.604457] ath5k_pci 0000:05:00.0: > RF2112A 2GHz radio found (0x56) > Dec 3 10:24:37 linux-lf5g ifup: wmaster0 > Dec 3 10:24:37 linux-lf5g ifup: No configuration found for > wmaster0 > Dec 3 10:24:37 linux-lf5g ifup: ath0 > Dec 3 10:24:37 linux-lf5g ifup: No configuration found for ath0 > Dec 3 10:24:50 linux-lf5g kernel: [ 115.191304] ADDRCONF(NETDEV_UP): ath0: > link is not ready
Seems you haven't set an ssid. Try something like: iwconfig wlan0 essid your_essid You should then see the link will become active. Then you can run your favorite dhcp client script (except dhclient, on ppc it has issues, use another if on ppc). Luis _______________________________________________ ath5k-devel mailing list ath5k-devel@lists.ath5k.org https://lists.ath5k.org/mailman/listinfo/ath5k-devel
