On Wed, Jun 29, 2011 at 10:13 PM, Sivaraman V <kru...@gmail.com> wrote: > Dear Mr Md Shafi, > > I tried every thing you said. > > As advised by you I removed the widows device drive and ndiswrapper. > i down loaded latest compat driver 2011-06-28. > when I ran command "make" there were errors.
i also faced this problem, please use the 2011-06-18 itself, lets fix compat wireless later :) and please follow the steps i told before > > I attach various outputs of dmesg and also the error message I got when I > ran the command "make". > The file names itself is self explanatory. > > Thanks for all the pains you are taking. > > Sivaraman > > PS: I am using the windows o/s [though I do not much like it] and sending > this mail. > I am waiting for the day when i go totally linux. > > > > > On Wed, Jun 29, 2011 at 2:55 PM, Mohammed Shafi <shafi.wirel...@gmail.com> > wrote: >> >> On Tue, Jun 28, 2011 at 9:24 PM, Sivaraman V <kru...@gmail.com> wrote: >> > Dear Shri Md shafi, >> > >> > I down-loaded the fw file and have compat file dated 18-06-2011. >> > >> > Should I first remove the ndiswrapper driver and then run the compat >> > file or >> >> yes please, you can make with ath9k_htc driver and firmware alone >> >> > >> > as it is I can go ahead and run the "make" file? >> >> yes make then sudo make install >> http://wireless.kernel.org/en/users/Download >> >> > >> > I also copied the fw file in the /lib/firmware directory. >> > >> > I presume that you will want me send the dmesg file only after the above >> > is >> > run. >> >> after the driver is loaded >> sudo modprobe ath9k_htc >> dmesg >> >> so that we understand what went wrong >> >> > >> > How ever the dmsg.txt file as of now attached. >> > >> > Thanks a lot >> > Sivaraman >> > >> > >> > >> > On Tue, Jun 28, 2011 at 8:32 PM, Mohammed Shafi >> > <shafi.wirel...@gmail.com> >> > wrote: >> >> >> >> On Tue, Jun 28, 2011 at 7:10 PM, Sivaraman V <kru...@gmail.com> wrote: >> >> > Dear Sirs, >> >> > >> >> > Thank you very much on your mail. >> >> > I am novice in linux and definitely not an expert. >> >> > >> >> > The issue is as under: >> >> > I have debian 6.0.a squeeze installed in my AMD processor computer. >> >> > kernel is 2.6.32-5-686 >> >> > 32 bit version. RAM 2gb, >> >> > HDD 500gb. [sata disk] >> >> > OS installed in the partition /dev/sda7. >> >> > >> >> > the wireless hard ware I have is Netgear N-150. >> >> > the command lsusb returns the hw as >> >> > "Netgear N-150 < Atheros ar9271 > >> >> > >> >> > I have installed the firmware for ar9271 from the Internet. >> >> > I down loaded latest 22-06-2011 compat driver. >> >> > the command "make" does not compile the necessary module. >> >> > When i explored /compat-wireless-yyy-mm-dd/compat folder, I found >> >> > that >> >> > the >> >> > command >> >> > "make" had generated number of doc"o" files based on the kernel from >> >> > the >> >> > dot"c" files. >> >> > >> >> > the said folder had dot"c" files for kernel ver compat-2.6.14.c >> >> > onwards. >> >> > how ever dot"o" files were getting generated from 2.6.33 and above >> >> > only. >> >> > >> >> > hence i was not able to configure the wireless usb drive. >> >> > >> >> > I took the best option of using "ndiswrapper" and configured the >> >> > wireless >> >> > with "windows driver". >> >> >> >> please post your dmesg so that we would know what went wrong, when you >> >> plug-in plug-out the USB card. >> >> >> >> please check: >> >> 1.you have the 1.3 firmware downloaded >> >> http://wireless.kernel.org/download/htc_fw/ >> >> copy htc_9271.fw to /lib/firmware >> >> 2. recompile compat-wireless, reboot the system. >> >> 3. replug the USB stick. >> >> >> >> >> >> > >> >> > >> >> > Thanks once again for your kind response to my mail. >> >> > >> >> > Sivaraman >> >> > Chennai, India >> >> > >> >> > >> >> > On Tue, Jun 28, 2011 at 12:31 PM, Mohammed Shafi >> >> > <shafi.wirel...@gmail.com> >> >> > wrote: >> >> >> >> >> >> On Mon, Jun 27, 2011 at 10:32 PM, Pavel Roskin <pro...@gnu.org> >> >> >> wrote: >> >> >> > On 06/24/2011 01:31 PM, V Sivaraman wrote: >> >> >> >> >> >> >> >> Dear all, >> >> >> >> >> >> >> >> I have debian 6.0 squeezee 2.6.32-5-686. >> >> >> >> >> >> >> >> I have Netgear N 150 [Atheros ar9271] usb device. >> >> >> >> I have istalled ar9271.fw in appopriate directory. >> >> >> >> I down loaded compat-wireless driver. >> >> >> >> when i run "make" the .o files get generted from >> >> >> >> the kernel 2.6.33 and onwards like compat_2.6.33.o; 2.6.34.o and >> >> >> >> corresponding .ko files etc. >> >> >> >> But it does not make compat_2.6.32.o and .ko files. >> >> >> >> Due to this the appropriate module does not get loaded. >> >> >> >> How can I that makes it difficult for the module? >> >> >> > >> >> >> > Describe the problem's symptoms, not your guesses >> >> >> > http://www.catb.org/~esr/faqs/smart-questions.html#symptoms >> >> >> >> >> >> also please check whether this issue is seen in latest compat >> >> >> wireless >> >> >> >> >> >> > >> >> >> > -- >> >> >> > Regards, >> >> >> > Pavel Roskin >> >> >> > _______________________________________________ >> >> >> > ath9k-devel mailing list >> >> >> > ath9k-devel@lists.ath9k.org >> >> >> > https://lists.ath9k.org/mailman/listinfo/ath9k-devel >> >> >> > >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> shafi >> >> > >> >> > >> >> >> >> >> >> >> >> -- >> >> shafi >> > >> > >> >> >> >> -- >> shafi > > -- shafi _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
