On Thu, Jun 30, 2011 at 10:23 AM, Mohammed Shafi <shafi.wirel...@gmail.com> wrote: > On Wed, Jun 29, 2011 at 10:13 PM, Sivaraman V <kru...@gmail.com> wrote: >> Dear Mr Md Shafi, >> >> I tried every thing you said. >> >> As advised by you I removed the widows device drive and ndiswrapper. >> i down loaded latest compat driver 2011-06-28. >> when I ran command "make" there were errors. > > i also faced this problem, please use the 2011-06-18 itself, lets fix > compat wireless later :) and please follow the steps i told before
sorry i missed Pavel Roskin's mail, you can try the patch (or) if you can go with http://linuxwireless.org/en/users/Download/stable/#compat-wireless_3.0_stable_releases > >> >> I attach various outputs of dmesg and also the error message I got when I >> ran the command "make". >> The file names itself is self explanatory. >> >> Thanks for all the pains you are taking. >> >> Sivaraman >> >> PS: I am using the windows o/s [though I do not much like it] and sending >> this mail. >> I am waiting for the day when i go totally linux. >> >> >> >> >> On Wed, Jun 29, 2011 at 2:55 PM, Mohammed Shafi <shafi.wirel...@gmail.com> >> wrote: >>> >>> On Tue, Jun 28, 2011 at 9:24 PM, Sivaraman V <kru...@gmail.com> wrote: >>> > Dear Shri Md shafi, >>> > >>> > I down-loaded the fw file and have compat file dated 18-06-2011. >>> > >>> > Should I first remove the ndiswrapper driver and then run the compat >>> > file or >>> >>> yes please, you can make with ath9k_htc driver and firmware alone >>> >>> > >>> > as it is I can go ahead and run the "make" file? >>> >>> yes make then sudo make install >>> http://wireless.kernel.org/en/users/Download >>> >>> > >>> > I also copied the fw file in the /lib/firmware directory. >>> > >>> > I presume that you will want me send the dmesg file only after the above >>> > is >>> > run. >>> >>> after the driver is loaded >>> sudo modprobe ath9k_htc >>> dmesg >>> >>> so that we understand what went wrong >>> >>> > >>> > How ever the dmsg.txt file as of now attached. >>> > >>> > Thanks a lot >>> > Sivaraman >>> > >>> > >>> > >>> > On Tue, Jun 28, 2011 at 8:32 PM, Mohammed Shafi >>> > <shafi.wirel...@gmail.com> >>> > wrote: >>> >> >>> >> On Tue, Jun 28, 2011 at 7:10 PM, Sivaraman V <kru...@gmail.com> wrote: >>> >> > Dear Sirs, >>> >> > >>> >> > Thank you very much on your mail. >>> >> > I am novice in linux and definitely not an expert. >>> >> > >>> >> > The issue is as under: >>> >> > I have debian 6.0.a squeeze installed in my AMD processor computer. >>> >> > kernel is 2.6.32-5-686 >>> >> > 32 bit version. RAM 2gb, >>> >> > HDD 500gb. [sata disk] >>> >> > OS installed in the partition /dev/sda7. >>> >> > >>> >> > the wireless hard ware I have is Netgear N-150. >>> >> > the command lsusb returns the hw as >>> >> > "Netgear N-150 < Atheros ar9271 > >>> >> > >>> >> > I have installed the firmware for ar9271 from the Internet. >>> >> > I down loaded latest 22-06-2011 compat driver. >>> >> > the command "make" does not compile the necessary module. >>> >> > When i explored /compat-wireless-yyy-mm-dd/compat folder, I found >>> >> > that >>> >> > the >>> >> > command >>> >> > "make" had generated number of doc"o" files based on the kernel from >>> >> > the >>> >> > dot"c" files. >>> >> > >>> >> > the said folder had dot"c" files for kernel ver compat-2.6.14.c >>> >> > onwards. >>> >> > how ever dot"o" files were getting generated from 2.6.33 and above >>> >> > only. >>> >> > >>> >> > hence i was not able to configure the wireless usb drive. >>> >> > >>> >> > I took the best option of using "ndiswrapper" and configured the >>> >> > wireless >>> >> > with "windows driver". >>> >> >>> >> please post your dmesg so that we would know what went wrong, when you >>> >> plug-in plug-out the USB card. >>> >> >>> >> please check: >>> >> 1.you have the 1.3 firmware downloaded >>> >> http://wireless.kernel.org/download/htc_fw/ >>> >> copy htc_9271.fw to /lib/firmware >>> >> 2. recompile compat-wireless, reboot the system. >>> >> 3. replug the USB stick. >>> >> >>> >> >>> >> > >>> >> > >>> >> > Thanks once again for your kind response to my mail. >>> >> > >>> >> > Sivaraman >>> >> > Chennai, India >>> >> > >>> >> > >>> >> > On Tue, Jun 28, 2011 at 12:31 PM, Mohammed Shafi >>> >> > <shafi.wirel...@gmail.com> >>> >> > wrote: >>> >> >> >>> >> >> On Mon, Jun 27, 2011 at 10:32 PM, Pavel Roskin <pro...@gnu.org> >>> >> >> wrote: >>> >> >> > On 06/24/2011 01:31 PM, V Sivaraman wrote: >>> >> >> >> >>> >> >> >> Dear all, >>> >> >> >> >>> >> >> >> I have debian 6.0 squeezee 2.6.32-5-686. >>> >> >> >> >>> >> >> >> I have Netgear N 150 [Atheros ar9271] usb device. >>> >> >> >> I have istalled ar9271.fw in appopriate directory. >>> >> >> >> I down loaded compat-wireless driver. >>> >> >> >> when i run "make" the .o files get generted from >>> >> >> >> the kernel 2.6.33 and onwards like compat_2.6.33.o; 2.6.34.o and >>> >> >> >> corresponding .ko files etc. >>> >> >> >> But it does not make compat_2.6.32.o and .ko files. >>> >> >> >> Due to this the appropriate module does not get loaded. >>> >> >> >> How can I that makes it difficult for the module? >>> >> >> > >>> >> >> > Describe the problem's symptoms, not your guesses >>> >> >> > http://www.catb.org/~esr/faqs/smart-questions.html#symptoms >>> >> >> >>> >> >> also please check whether this issue is seen in latest compat >>> >> >> wireless >>> >> >> >>> >> >> > >>> >> >> > -- >>> >> >> > Regards, >>> >> >> > Pavel Roskin >>> >> >> > _______________________________________________ >>> >> >> > ath9k-devel mailing list >>> >> >> > ath9k-devel@lists.ath9k.org >>> >> >> > https://lists.ath9k.org/mailman/listinfo/ath9k-devel >>> >> >> > >>> >> >> >>> >> >> >>> >> >> >>> >> >> -- >>> >> >> shafi >>> >> > >>> >> > >>> >> >>> >> >>> >> >>> >> -- >>> >> shafi >>> > >>> > >>> >>> >>> >>> -- >>> shafi >> >> > > > > -- > shafi > -- shafi _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
