Fxdwg123;530348 Wrote: > Thanks for the advise, makes sense normally. However I want to keep my > other chain for playing vinyl and cd's as total Meridian (G06 --> G02 > --> G57). I have been told that Meridian has maximum SQ keeping all the > same brand. Next to that I have in the back of my mind that the G57 > (which is an A/B amplifier) on low volumes used the A amplifier part, > which should be the best in the current setup with the Transporter. But > perhaps this remark illustrates that I still do not understand it all > :) !
Nearly - Class AB amps operate in Class A at low signals so there is no crossover distortion and switch to Class B at higher levels where crossover distortion is not a problem! You won't hear any difference at all between the two modes of operation (unless your amp is very faulty!), so should still follow the normal rules of gain staging. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB Touch Beta (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=76659 _______________________________________________ audiophiles mailing list audiophiles@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/audiophiles
