On 1/4/06, Fisherss <[EMAIL PROTECTED]> wrote:
> /dev/sda1 ????  Looks like that's the problem.
> On my PC, the device file is /dev/uba, and if I format the SD card to
> make it link to /dev/uba1, it doesn't work.
> this may give you some help:
> 1. mke2fs /dev/sda (or /dev/uba ?)
> 2. fdisk /dev/sda , then the fdisk may tell you there is no DOS
> partition table, has created automatically.  and then you write change
> to SD card and exit (I forget the exact command, maybe w or q ?)

Are you sure this is correct? You don't create a partition first, and
then format it? What I've done (and most likely the rest also) is
this:
1. fdisk /dev/sda (in my case /dev/sdc)
   Create a new partition table (o), and a new primary partition,
using all the disk space (Linux partition)
2. mke2fs /dev/sda1 (in my case /dev/sdc1)

I'll try your method this night, maybe it does work but I'm just not
familiar to that way of formatting.


Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to