I think my method is right. Every time the file system on my SD card crashed, I format it this way to reset everything.

JeDi wrote:
On 1/4/06, Fisherss <[EMAIL PROTECTED]> wrote:
/dev/sda1 ????  Looks like that's the problem.
On my PC, the device file is /dev/uba, and if I format the SD card to
make it link to /dev/uba1, it doesn't work.
this may give you some help:
1. mke2fs /dev/sda (or /dev/uba ?)
2. fdisk /dev/sda , then the fdisk may tell you there is no DOS
partition table, has created automatically.  and then you write change
to SD card and exit (I forget the exact command, maybe w or q ?)

Are you sure this is correct? You don't create a partition first, and
then format it? What I've done (and most likely the rest also) is
this:
1. fdisk /dev/sda (in my case /dev/sdc)
   Create a new partition table (o), and a new primary partition,
using all the disk space (Linux partition)
2. mke2fs /dev/sda1 (in my case /dev/sdc1)

I'll try your method this night, maybe it does work but I'm just not
familiar to that way of formatting.


Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to