Well... sometimes part1 doesn't works, sometimes part2, sometimes disc...
I finally made 3 lines mounting each device, so between the three there's one that will mount :D Ok, i can't see the kernel booting, but it slowly fades from the haret app into a white screen, with some vertical lines.
At least it seems the SD card is mounted, but Opie is not loading :(
Anything more that i should try?

I was considering putting udev into the initrd, i haven't looked for info about udev on an arm arch... but it would help us a lot :)


JeDi wrote:
On 1/5/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:

Yup, i tried Jedi's way, it says "there's no such device or
>> address" , well, off to work, this night perhaps i'll be fresh and
see what i'm doing wrong, thanks :)


These are the steps how I got it working:
1. fdisk /dev/hdc
2. create one partition (whole disk, linux system)
3. mke2fs /dev/hdc1
4. edit the linuxrc to mount /dev/mmc/blk0/part1 in stead of /dev/mmc/blk0/disk
5. Watch OPIE boot :-)

Maybe your SD card isn't supported? I use a 256MB card from SanDisk.
I've heard some stories about some brands of SD cards not being
supported.

Good luck!
Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to