On Tue, 19 Jul 2011 00:39:10 +0200 Rafał Miłecki <[email protected]> wrote:
> W dniu 18 lipca 2011 22:41 użytkownik Michael Büsch <[email protected]> napisał: > > On Mon, 18 Jul 2011 22:14:50 +0200 > > Rafał Miłecki <[email protected]> wrote: > > > >> When using DMA on one of my BCM4321s and BCM43224 or BCM43225 I don't > >> get a single RX IRQ. > >> > >> Doing scanning requests sends TX packets to the hardware, and the > >> ucode generates IRQs for confirming transmitted packets. RX does not > >> seem to work however. I expected to see "native" beacons, or response > >> to the scanning request. > >> > >> Do you have idea what may be wrong, where should I look at? > > > > Is wl still using the same dma engine for > > RX as older versions did? (what was it? the first?) > > Yes. That's what wl does: > > 1) Disabling DMA engines (RX part) > write32 0xfaafc220 <- 0x00000000 > read32 0xfaafc230 -> 0x00000000 > > 2) Enabling DMA engines (RX part) > read32 0xfaafc220 -> 0x00000040 > write32 0xfaafc220 <- 0x0000084d CTL: [38 << 1 (OFFSET) | 0x1 (EN) | > 0x800 (PARITY)] > write32 0xfaafc228 <- 0x18948000 LO: [lo addr & ~routing_bits] > write32 0xfaafc22c <- 0x80000000 HI: [routing & ~ROUT_MASK | routing] > > (improved) b43 does: > > write32 0xfaafc220 <- 0x0000084d CTL > write32 0xfaafc228 <- 0x17b70000 LO > write32 0xfaafc22c <- 0x80000000 HI > write32 0xfaafc224 <- 0x00000400 STOP IDX What about the DMA interrupt masks? _______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
