Aaron,
When I ran the command line that it's trying, the data isn't coming, rsync
is running on the client, but it stops there. The backuppc logs state that
it's saving the data as a partial, tho. The ClientTimeout, may be it, I
think I'll reduce it to something a lotta bit more sane... like 5 min... I
hope this works.... but I'll let you know either way. Thanks for the quick
reply.
Peter N.
On 3/15/07, Ciarlotta, Aaron <[EMAIL PROTECTED]> wrote:
You didn't say if it appeared as though data was coming across the wire
or not.
This is possibly the culprit:
*$Conf{ClientTimeout} = 72000;*
Timeout in seconds when listening for the transport program's (smbclient,
tar etc) stdout. If no output is received during this time, then it is
assumed that something has wedged during a backup, and the backup is
terminated.
Note that stdout buffering combined with huge files being backed up could
cause longish delays in the output from smbclient that BackupPC_dump sees,
so in rare cases you might want to increase this value.
Despite the name, this parameter sets the timeout for all transport
methods (tar, smb etc).
------------------------------
*From:* [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Peter Nearing
*Sent:* Thursday, March 15, 2007 3:50 PM
*To:* [email protected]
*Subject:* [BackupPC-users] Problems with backuppc
Hey,
I'm Peter, and I have been using backuppc for about 8 months now, and I
am an addict.... oops, wrong open.... anyway....
I am a network admin for a prof. at Queens University, and I have 8
computers that I backup using backuppc, using rsync over ssh. I have
recently ran into a problem with backuppc failing while backing up one of my
desktops, giving me the reason of sig ALARM. I was wondering if anyone else
here has had this problem, and if so, what it's caused by. The xfer seems
to start fine, but after about 5 hours, it fails... originally I thought the
problem maybe due to a partially corrupt filesystem, since I am using xfs,
and it does crap out from time to time, but it would seem as though that
isn't the case, as I have done a fsck on all the drives, and repaired the
one error I got on the client. I tried the backup again, and again it
failed. So now, I'm not so sure as to the problem. If anyone has any
suggestions, or knows why backuppc would be getting a sig alrm, it would be
greatly appreciated.
Oh and a huge thanks to the guys who made this great peice of software.
Peter N.
The information in this electronic mail message is sender's
business Confidential and may be legally privileged. It is
intended solely for the addressee(s). Access to this Internet
electronic mail message by anyone else is unauthorized. If
you are not the intended recipient, any disclosure, copying,
distribution or any action taken or omitted to be taken in
reliance on it is prohibited and may be unlawful. The sender
believes that this E-mail and any attachments were free of
any virus, worm, Trojan horse, and/or malicious code when
sent. This message and its attachments could have been
infected during transmission. By reading the message and
opening any attachments, the recipient accepts full
responsibility for taking protective and remedial action about
viruses and other defects. Travelport Inc. is not liable for any loss
or damage arising in any way from this message or its
attachments.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
BackupPC-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/backuppc-users
http://backuppc.sourceforge.net/
