Hi All,
I just conducted a successful restore job via bconsole, but received
some weird warning messages. Suspiciously, these warnings started to
appear after a library (robotics and drive) firmware upgrade.
The warning that I receive is:
Warning: acquire.c:200 Read open device "Drive-1" (/dev/nst0) Volume
"MSR115L3" failed: ERR=dev.c:424 Unable to open device "Drive-1"
(/dev/nst0): ERR=Input/output error
The complete restore job output is provided below:
18-Sep 14:02 uwharrie-dir: Start Restore Job
RestoreFiles.2007-09-18_14.02.42
18-Sep 14:02 uwharrie-sd: 3307 Issuing autochanger "unload slot 1, drive
0" command.
18-Sep 14:03 uwharrie-sd: 3304 Issuing autochanger "load slot 11, drive
0" command.
18-Sep 14:03 uwharrie-sd: 3305 Autochanger "load slot 11, drive 0",
status is OK.
18-Sep 14:03 uwharrie-sd: 3301 Issuing autochanger "loaded? drive 0"
command.
18-Sep 14:03 uwharrie-sd: 3302 Autochanger "loaded? drive 0", result is
Slot 11.
18-Sep 14:03 uwharrie-sd: RestoreFiles.2007-09-18_14.02.42 Warning:
acquire.c:200 Read open device "Drive-1" (/dev/nst0) Volume "MSR115L3"
failed: ERR=dev.c:424 Unable to open device "Drive-1" (/dev/nst0):
ERR=Input/output error
18-Sep 14:03 uwharrie-sd: 3301 Issuing autochanger "loaded? drive 0"
command.
18-Sep 14:03 uwharrie-sd: 3302 Autochanger "loaded? drive 0", result is
Slot 11.
18-Sep 14:03 uwharrie-sd: RestoreFiles.2007-09-18_14.02.42 Warning:
acquire.c:200 Read open device "Drive-1" (/dev/nst0) Volume "MSR115L3"
failed: ERR=dev.c:424 Unable to open device "Drive-1" (/dev/nst0):
ERR=Input/output error
18-Sep 14:03 uwharrie-sd: Please mount Volume "MSR115L3" on Storage
Device "Drive-1" (/dev/nst0) for Job RestoreFiles.2007-09-18_14.02.42
18-Sep 14:06 uwharrie-sd: 3301 Issuing autochanger "loaded? drive 0"
command.
18-Sep 14:06 uwharrie-sd: 3302 Autochanger "loaded? drive 0", result is
Slot 11.
18-Sep 14:06 uwharrie-sd: Ready to read from volume "MSR115L3" on device
"Drive-1" (/dev/nst0).
18-Sep 14:06 uwharrie-sd: Forward spacing Volume "MSR115L3" to
file:block 692:0.
18-Sep 14:08 uwharrie-sd: End of Volume at file 692 on device "Drive-1"
(/dev/nst0), Volume "MSR115L3"
18-Sep 14:08 uwharrie-sd: End of all volumes.
18-Sep 14:08 uwharrie-dir: Bacula 2.0.1 (12Jan07): 18-Sep-2007 14:08:34
JobId: 2306
Job: RestoreFiles.2007-09-18_14.02.42
Client: uwharrie-fd
Start time: 18-Sep-2007 14:02:44
End time: 18-Sep-2007 14:08:34
Files Expected: 1
Files Restored: 1
Bytes Restored: 32,813
Rate: 0.1 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Restore OK
I also received a similar warning message at bconsole by simply mounting
a different tape:
*mount
The defined Storage resources are:
1: Tape
2: File
Select Storage resource (1-2): 1
Connecting to Storage daemon Tape at uwharrie:9103 ...
Enter autochanger slot: 1
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 1, drive 0" command.
3305 Autochanger "load slot 1, drive 0", status is OK.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 1.
3901 open device failed: ERR=dev.c:424 Unable to open device "Drive-1"
(/dev/nst0): ERR=Input/output error
My hardware/software configuration is:
- Dell PE 2650 (1 x 73 GB RAID 1 (OS), 1 x 1.3 TB RAID 0 (data spooling
partition) , 4 GB RAM, 2 GB swap)
- Quantum PX502 (LTO-3, FC, 1-Drive)
- RHEL 4 AS
- Bacula 2.0.1 (Pools=Weekly, Monthly, Scratch, Migrate, Archive)
Any thoughts?
Regards,
Mike
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
