I'm having difficulty posting so I apologize if this is a repost.
Hello Everyone,
I’m new to using Bacula and am having a little trouble setting up
the configurations.
When I run cat /proc/scsi/scsi I get the following back
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: DELL Model: PV-132T Rev: 308D
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: ULTRIUM-TD2 Rev: 53Y3
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 01 Id: 02 Lun: 00
Vendor: IBM Model: ULTRIUM-TD2 Rev: 37RH
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 08 Lun: 00
Vendor: DP Model: BACKPLANE Rev: 1.05
Type: Enclosure ANSI SCSI revision: 05
Host: scsi1 Channel: 02 Id: 00 Lun: 00
Vendor: DELL Model: PERC 5/i Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 05
Next I run mtx –f /dev/sg0 status
Storage Changer /dev/sg0:2 Drives, 23 Slots ( 1 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Empty
Storage Element 1:Full :VolumeTag=000013
Storage Element 2:Full :VolumeTag=000019
Storage Element 3:Full :VolumeTag=000020
Storage Element 4:Full :VolumeTag=000021
Storage Element 5:Full :VolumeTag=000017
Storage Element 6:Full :VolumeTag=000018
Storage Element 7:Full :VolumeTag=000022
Storage Element 8:Full :VolumeTag=000001
Storage Element 9:Full :VolumeTag=000008
Storage Element 10:Full :VolumeTag=000004
Storage Element 11:Full :VolumeTag=000007
Storage Element 12:Full :VolumeTag=000011
Storage Element 13:Full :VolumeTag=000009
Storage Element 14:Full :VolumeTag=000010
Storage Element 15:Full :VolumeTag=000016
Storage Element 16:Full :VolumeTag=000002
Storage Element 17:Empty:VolumeTag=
Storage Element 18:Full :VolumeTag=000014
Storage Element 19:Full :VolumeTag=000015
Storage Element 20:Full :VolumeTag=000003
Storage Element 21:Full :VolumeTag=000005
Storage Element 22:Full :VolumeTag=000006
Storage Element 23 IMPORT/EXPORT:Full :VolumeTag=000012
/mtx –f /dev/sg0 inquiry shows:
Product Type: Medium Changer
Vendor ID: 'DELL '
Product ID: 'PV-132T '
Revision: '308D'
Attached Changer API: No
/mtx –f /dev/sg1 inquiry shows:
Product Type: Tape Drive
Vendor ID: 'IBM '
Product ID: 'ULTRIUM-TD2 '
Revision: '53Y3'
Attached Changer API: No
/mtx –f /dev/sg2 inquiry shows:
Product Type: Tape Drive
Vendor ID: 'IBM '
Product ID: 'ULTRIUM-TD2 '
Revision: '37RH'
Attached Changer API: No
/mt –f /dev/nst0 status shows:
SCSI 2 tape drive:
File number=-1, block number=-1, partition=0.
Tape block size 0 bytes. Density code 0x0 (default).
Soft error count since last status=0
General status bits on (50000):
DR_OPEN IM_REP_EN
In bacula-sd.conf I have the following setup:
Autochanger {
Name = Autochanger
Device = DellPowerVault132T
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg0
}
Device {
Name = DellPowerVault132T
LabelMedia = yes
Drive Index = 0
Media Type = LTO-3
Archive Device = /dev/nst0
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Hardware End of Medium = No
BSF at EOM = yes
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
TWO EOF = yes
}
Also in the bacula-dir.conf I have the following setup:
Storage {
Name = File
# Do not use "localhost" here
Address = <<server_name>> # N.B. Use a fully qualified name
here
SDPort = 9103
Password = "<xxx>"
Device = DellPowerVault132T
Media Type = LTO-3
}
Does everything look correctly setup?
When I try to mounting the storage using the Webmin Bacula console I get the
following error:
Mounting volume on storage device File .. Automatically selected Catalog:
MyCatalogUsing Catalog "MyCatalog"3301 Issuing autochanger "loaded? drive 0"
command.3302 Autochanger "loaded? drive 0", result: nothing loaded.3901 open
device failed: ERR=dev.c:433 Unable to open device "DellPowerVault132T"
(/dev/nst0): ERR=No medium found
Any help would be appreciated.
Thanks,
Nick
_________________________________________________________________
Watch “Cause Effect,” a show about real people making a real difference.
http://im.live.com/Messenger/IM/MTV/?source=text_watchcause-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
