----- Original Message ----- From: "Ralf Gross" <[EMAIL PROTECTED]> To: <bacula-users@lists.sourceforge.net> Sent: Tuesday, January 15, 2008 10:57 AM Subject: Re: [Bacula-users] Newbie Help Configuring Bacula with Dell 132T
> Nick - schrieb: > >> Next I run mtx ?f /dev/sg0 status >> >> /mtx ?f /dev/sg0 inquiry shows: >> >> When I try to mounting the storage using the Webmin Bacula console I get >> the following error: >> >> Mounting volume on storage device File .. Automatically selected Catalog: >> MyCatalogUsing Catalog "MyCatalog"3301 Issuing autochanger "loaded? drive >> 0" command.3302 Autochanger "loaded? drive 0", result: nothing >> loaded.3901 open device failed: ERR=dev.c:433 Unable to open device >> "DellPowerVault132T" (/dev/nst0): ERR=No medium found It is using a different device in the mount, it is using /dev/nst0, not the /dev/sg0 device with which you tested mtx. Could this not be your problem? Nicki ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users