Nick - schrieb:

> Next I run mtx ?f /dev/sg0 status
>  
>   Storage Changer /dev/sg0:2 Drives, 23 Slots ( 1 Import/Export )
> Data Transfer Element 0:Empty
> Data Transfer Element 1:Empty
>       Storage Element 1:Full :VolumeTag=000013                          
> [...]  
> /mtx ?f /dev/sg0 inquiry shows:
>  
> Product Type: Medium Changer
> Vendor ID: 'DELL    '
> Product ID: 'PV-132T         '
> Revision: '308D'
> Attached Changer API: No
>  
> [...]
> When I try to mounting the storage using the Webmin Bacula console I get the 
> following error:
>  
> Mounting volume on storage device File .. Automatically selected Catalog: 
> MyCatalogUsing Catalog "MyCatalog"3301 Issuing autochanger "loaded? drive 0" 
> command.3302 Autochanger "loaded? drive 0", result: nothing loaded.3901 open 
> device failed: ERR=dev.c:433 Unable to open device "DellPowerVault132T" 
> (/dev/nst0): ERR=No medium found 

As which user did you run the mtx/mt tests? You should run them as the
user the sd is running (eg. bacula). Check the permissions of the
devices. I can't say much about the webmin bacula console, I would try
bconsole.

Ralf

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to