I'm not sure what is not configured correctly but it is now causing my system
to lockup when I try to mount and unmount using bconsole and then when I try
running mtx or mt it says the device does not exist. After a few minutes the
server locks up and I need to power cycle it.
*mountAutomatically selected Catalog: MyCatalogUsing Catalog
"MyCatalog"Automatically selected Storage: File3301 Issuing autochanger
"loaded? drive 0" command.3302 Autochanger "loaded? drive 0", result is Slot
1.3901 open device failed: ERR=dev.c:433 Unable to open device "DRIVE1"
(/dev/nst0): ERR=No such device or address
*unmountAutomatically selected Catalog: MyCatalogUsing Catalog
"MyCatalog"Automatically selected Storage: File3307 Issuing autochanger "unload
slot 1, drive 0" command.3995 Bad autochanger "unload slot 1, drive 0":
ERR=Child died from signal 15: TerminationResults=Unloading drive 0 into
Storage Element 1...doneProgram killed by Bacula watchdog (timeout)
3901 Device "DRIVE1" (/dev/nst0) is already unmounted.
> From: [EMAIL PROTECTED]> To: [EMAIL PROTECTED];
> bacula-users@lists.sourceforge.net> Date: Tue, 15 Jan 2008 11:25:38 +0200>
> Subject: Re: [Bacula-users] Newbie Help Configuring Bacula with Dell 132T> >
> > ----- Original Message ----- > From: "Ralf Gross" <[EMAIL PROTECTED]>> To:
> <bacula-users@lists.sourceforge.net>> Sent: Tuesday, January 15, 2008 10:57
> AM> Subject: Re: [Bacula-users] Newbie Help Configuring Bacula with Dell
> 132T> > > > Nick - schrieb:> >> >> Next I run mtx ?f /dev/sg0 status> >>> >>
> /mtx ?f /dev/sg0 inquiry shows:> >>> >> When I try to mounting the storage
> using the Webmin Bacula console I get > >> the following error:> >>> >>
> Mounting volume on storage device File .. Automatically selected Catalog: >
> >> MyCatalogUsing Catalog "MyCatalog"3301 Issuing autochanger "loaded? drive
> > >> 0" command.3302 Autochanger "loaded? drive 0", result: nothing > >>
> loaded.3901 open device failed: ERR=dev.c:433 Unable to open device > >>
> "DellPowerVault132T" (/dev/nst0): ERR=No medium found> > It is using a
> different device in the mount, it is using /dev/nst0, not the > /dev/sg0
> device with which you tested mtx. Could this not be your problem?> > Nicki >
> > >
> ------------------------------------------------------------------------->
> Check out the new SourceForge.net Marketplace.> It's the best place to buy or
> sell services for> just about anything Open Source.>
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace>
> _______________________________________________> Bacula-users mailing list>
> Bacula-users@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/bacula-users
_________________________________________________________________
Make distant family not so distant with Windows Vista® + Windows Live™.
http://www.microsoft.com/windows/digitallife/keepintouch.mspx?ocid=TXT_TAGLM_CPC_VideoChat_distantfamily_012008
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
