2010/8/12 Jeremiah D. Jester <jj...@u.washington.edu>: > I’m setting up bacula on a new machine with a new Dell LT04 autoloader. The > device appears to be registering with linux (rhel 5.5). All fd,sd and dir > daemons are running. > > [r...@scrappy bacula]# dmesg | grep "tape" > > st 2:0:0:0: Attached scsi tape st0 > > However I get a “no slots in changer” error when run ‘status slots’. > > > > *status slots > > … > > Connecting to Storage daemon Tape at scrappy.microslu.washington.edu:9103 > ... > > 3306 Issuing autochanger "slots" command. > > Device "DELL_124T" has 0 slots. > > No slots in changer to scan. > > > > I also tried running ‘mtx’ manually. Any thoughts? > /dev/sg0 is probably not the changer device.
tapeinfo /dev/sg0 John ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users