I'm confused. The tapeinfo output for /dev/sg1 says it is a 'Tape Drive' and of type 'TD4' or LT04, the new supported capacity. Sg0 is the hard drive. I get no output for devices sg3-sg10. Please explain.
Thanks. [r...@scrappy bacula]# tapeinfo -f /dev/sg1 Product Type: Tape Drive Vendor ID: 'IBM ' Product ID: 'ULTRIUM-TD4 ' Revision: '97F0' Attached Changer: No SerialNumber: '1310220895' MinBlock:1 MaxBlock:16777215 SCSI ID: 0 SCSI LUN: 0 Ready: yes BufferedMode: yes Medium Type: 0x48 Density Code: 0x46 BlockSize: 0 DataCompEnabled: yes DataCompCapable: yes DataDeCompEnabled: yes CompType: 0x1 DeCompType: 0x1 BOP: yes Block Position: 0 -----Original Message----- From: John Drescher [mailto:[email protected]] Sent: Thursday, August 12, 2010 2:04 PM To: Jeremiah D. Jester Cc: bacula-users Subject: Re: [Bacula-users] new bacula installation On Thu, Aug 12, 2010 at 4:58 PM, Jeremiah D. Jester <[email protected]> wrote: > John, > > You are correct. The device wasn't 'sg0' but rather 'sg1'. I made the change > in bacula-sd.conf, restarted daemons but still ran into the same problem. > Other ideas? > > [r...@scrappy bacula]# tapeinfo -f /dev/sg1 | head -5 > Product Type: Tape Drive > Vendor ID: 'IBM ' > Product ID: 'ULTRIUM-TD4 ' > Revision: '97F0' > Attached Changer: No > ... That is not it either. Here is an example from my autochanger dev6 ~ # tapeinfo -f /dev/sg5 Product Type: Medium Changer Vendor ID: 'EXABYTE ' Product ID: 'MAGNUM 224 ' Revision: 'C112' Attached Changer: No SerialNumber: '000089000435' SCSI ID: 3 SCSI LUN: 1 Ready: yes John ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
