On Thu, Aug 12, 2010 at 4:58 PM, Jeremiah D. Jester <jj...@u.washington.edu> wrote: > John, > > You are correct. The device wasn't 'sg0' but rather 'sg1'. I made the change > in bacula-sd.conf, restarted daemons but still ran into the same problem. > Other ideas? > > [r...@scrappy bacula]# tapeinfo -f /dev/sg1 | head -5 > Product Type: Tape Drive > Vendor ID: 'IBM ' > Product ID: 'ULTRIUM-TD4 ' > Revision: '97F0' > Attached Changer: No > ... That is not it either. Here is an example from my autochanger
dev6 ~ # tapeinfo -f /dev/sg5 Product Type: Medium Changer Vendor ID: 'EXABYTE ' Product ID: 'MAGNUM 224 ' Revision: 'C112' Attached Changer: No SerialNumber: '000089000435' SCSI ID: 3 SCSI LUN: 1 Ready: yes John ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users