Looks like mine is /dev/sg2. Thanks for sharing that command.
[r...@scrappy bacula]# cat /proc/scsi/sg/device_strs ATA WDC WD5000BEVT-0 01.0 IBM ULTRIUM-TD4 97F0 DELL PV-124T 0075 -----Original Message----- From: Richard Scobie [mailto:rich...@sauce.co.nz] Sent: Thursday, August 12, 2010 2:36 PM To: Jeremiah D. Jester Cc: John Drescher; bacula-users Subject: Re: [Bacula-users] new bacula installation Jeremiah D. Jester wrote: > I'm confused. The tapeinfo output for /dev/sg1 says it is a 'Tape Drive' and > of type 'TD4' or LT04, the new supported capacity. Sg0 is the hard drive. I > get no output for devices sg3-sg10. Please explain. What is the output of: cat /proc/scsi/sg/device_strs On my sd machine with attached HP changer, I get: ATA WDC WD2002FYPS-0 04.0 ATA WDC WD2002FYPS-0 04.0 ATA WDC WD2002FYPS-0 04.0 ATA WDC WD2002FYPS-0 04.0 ATA WDC WD2002FYPS-0 04.0 ATA WDC WD2002FYPS-0 04.0 ATA WDC WD3202ABYS-0 02.0 ATA WDC WD3202ABYS-0 02.0 ATA WDC WD2002FYPS-0 04.0 ATA WDC WD2002FYPS-0 04.0 HP Ultrium 4-SCSI B56W HP MSL G3 Series 4.70 This shows the changer component is /dev/sg11. Regards, Richard ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users