Hi
I have a tape “NTA658” that had an apparent barcode label error on it. I
replaced the barcode label with a new one and did a mt -f /dev/nst0 erase. I’m
now trying to relabel it (new label = ARR379L8”) but I get the following:
*label barcode
Automatically selected Storage: Changer1
Connecting to Storage daemon Changer1 at fnas1.cse.eng.auburn.edu:9103 ...
3306 Issuing autochanger "slots" command.
Device "Drive-1" has 16 slots.
Connecting to Storage daemon Changer1 at fnas1.cse.eng.auburn.edu:9103 ...
3306 Issuing autochanger "list" command.
The following Volumes will be labeled:
Slot Volume
==============
1 ARR379L8
Do you want to label these Volumes? (yes|no): yes
Defined Pools:
1: CleaningPool
2: Default
3: Scratch
Select the Pool (1-3): 2
Connecting to Storage daemon Changer1 at fnas1.cse.eng.auburn.edu:9103 ...
Sending label command for Volume "ARR379L8" Slot 1 ...
3912 Failed to label Volume ARR379L8: ERR=block.c:588 The Volume=ARR379L8 on
device="Drive-1" (/dev/nst0) appears to be unlabeled.
Label command failed for Volume ARR379L8.
Thanks for any help,
Kelly
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
