Thanks, I know asking for which OS to use is a loaded question, that usually has the simple answer, of which ever one works for you...
So after reading through the Angstrom/Rants thread, plus some others, decided to also try out Debian Wheezy, which I installed off of: http://elinux.org/BeagleBoardDebian. I installed the EMMC version, which is great. Now starting to fumble my way through to get the system configured up. I now have the wifi working, which is great. Yep driver just worked. Only thing I needed to do was to figure out how to configure it for my WPA... Now working. Took me a few minutes to figure out what IP address it has, as did not see anything in the dmesg output. Also dont have ifconfig... But found it looking at my DHCP servers log output. Next up: find where I put my 3.3v FTDI cable and look at seeing what I need to do again (if anything), to enable the usarts through the device maps. Was using a couple before for XBee and the like. Again thanks, Kurt -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
