Thanks, forgot to look in /sbin Making some progress, found my 3.3v FTDI cable so have the debug setup. Am now downloading source and the like to the board and installing build-esentials.
Next up see if using same steps as before (need to find them) to setup for the ttyOn devices. Just ran into having the WLAN dropping me and then reconnecting a few minutes later. I remember these issues from from before, maybe something like it powers itself down... Need to investigate. After that, at the end of dmesg I see: [ 2039.185393] wlan0: deauthenticated from 30:46:9a:02:49:a8 (Reason: 2) [ 2039.231769] cfg80211: Calling CRDA for country: US [ 2040.111858] hub 1-1:1.0: transfer --> -71 [ 2040.125075] wlan0: authenticate with 30:46:9a:02:49:a8 [ 2040.150919] wlan0: send auth to 30:46:9a:02:49:a8 (try 1/3) [ 2040.178916] wlan0: authenticated [ 2040.186600] wlan0: associate with 30:46:9a:02:49:a8 (try 1/3) [ 2040.198275] wlan0: RX AssocResp from 30:46:9a:02:49:a8 (capab=0x431 status=0 aid=6) [ 2040.208995] wlan0: associated In case anyone looks, from earlier on in dmesg: [ 7.302088] RTL8192cu 1-1.2:1.0: usb_probe_interface [ 7.302117] rtl8192cu 1-1.2:1.0: usb_probe_interface - got id [ 7.330628] rtl8192cu: Chip version 0x10 [ 7.664443] rtl8192cu: MAC address: 80:1f:02:9a:9b:e6 [ 7.669813] rtl8192cu: Board Type 0 [ 7.696119] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 7.724885] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin [ 7.757493] usbcore: registered new interface driver rtl8192cu Kurt -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
