On Thu, Mar 27, 2014 at 10:56 AM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Thu, Mar 27, 2014 at 9:25 AM, Mark A. Yoder <mark.a.yo...@gmail.com> wrote: >> I see a 2014-03-26 image has appeared. Unfortunately when I flash [1] and >> boot from it, it appears to never leave u-boot. Just 3 LEDs light and it >> just hangs. > > Humm, that means "uenvcmd" wasn't defined in uEnv.txt.. I wonder how > that happened (1). Does it help if you hold down the boot button? > What do you have flashed to the eMMC? (i have it setup to be > compatible with atleast Angstrom's 2013.06.20 u-boot) > > 1: > https://github.com/beagleboard/image-builder/blob/master/target/boot/beagleboard.org.txt#L45 > >> >> I try this on two SD cards and both had the same behavior. >> >> --Mark >> >> [1] >> http://rcn-ee.net/deb/testing/2014-03-26/bone-debian-7.4-2014-03-26-2gb.img.xz
Okay tested, and i see the issue.. To save bandwidth i mirror the kernel *.deb locally, which runs/updates at midnight, so the kernel never got installed. So i just need to add that error condition and just rerun the script again.. Thanks for testing, sorry for the error! ************************* U-Boot SPL 2014.04-rc2-00015-g99288ca (Mar 12 2014 - 09:49:41) reading args spl_load_image_fat_os: error reading image args, err - -1 reading u-boot.img reading u-boot.img U-Boot 2014.04-rc2-00015-g99288ca (Mar 12 2014 - 09:49:41) I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 mmc0 is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 0 reading uEnv.txt 1390 bytes read in 5 ms (271.5 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... reading zImage ** Unable to read file zImage ** reading initrd.img ** Unable to read file initrd.img ** reading /dtbs/am335x-boneblack.dtb ** Unable to read file /dtbs/am335x-boneblack.dtb ** Bad Linux ARM zImage magic! uenvcmd was not defined in uEnv.txt ... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 1 ** No partition table - mmc 1 ** Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** ** No partition table - mmc 1 ** Bad Linux ARM zImage magic! uenvcmd was not defined in uEnv.txt ... Booting from nand ... no devices available no devices available Bad Linux ARM zImage magic! U-Boot# ************ Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
