Err, rather Systemd lives in /lib/
On Fri, Aug 29, 2014 at 6:05 PM, William Hermans <yyrk...@gmail.com> wrote: > Even using the console image Robert and I suggested, you'll gain back a > lot more space on the eMMC. > > Also note that Roberts instruction for building from scratch / source is > done on a PC and not the BBB. But is more complex, and does pretty much > require Linux on that machine. I only mention this in case you're thinking > it has to be done on the BBB. > > There is also another method for making your image smaller( without > building from source ), but is complex and requires mix / matching files / > directories from multiple sources. I'm still investigating this myself, so > could not get into too much detail. Except that /var/modules is not fully > populated in *debian-7.5-bare-armhf-2014-07-07.tar.xz. *So if you need > specific modules . . .This could prove to be a minor pain in the butt at > minimum. Systemd also lives in this directory. > > > On Fri, Aug 29, 2014 at 11:53 AM, <m...@zepler.org> wrote: > >> Wiiliam, >> >> I am just this moment following the procedure Robert suggests, using the >> 2014-08-19 console image. I'll dump a list of packages installed in the >> 2014-05-14 'full' image installation before I re-flash it so I can compare >> what is in and what is not. I'm not in a position to build anything just >> yet - no free disc space! >> >> Max >> >> >> On Friday, 29 August 2014 19:47:48 UTC+1, William Hermans wrote: >>> >>> Max, you're better off either starting with the console image Robert >>> mentioned, or building your own from https://eewiki.net/display/ >>> linuxonarm/BeagleBone+Black#BeagleBoneBlack- >>> RootFileSystem%28smallflash%29 >>> >>> Once you get the console image going, it is a simple matter of apt-get >>> install <packages> >>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.