OK, so I think I got that figured out. Was not familiar with "seek", but am now. So what about uEnv.txt ?
On Tue, Sep 2, 2014 at 4:52 PM, William Hermans <yyrk...@gmail.com> wrote: > *done ;)* >> >> * dd if=MLO of=/dev/sdX count=1 seek=1 conv=notrunc bs=128k* >> * dd if=u-boot.img of=/dev/sdX count=2 seek=1 conv=notrunc bs=384k* >> >> * only works on omap4+ bootrom's (so the old omap34xx/omap36xx family is >> out)* >> >> * I'm close to rolling out a new testing image that uses this feature..* >> * The flasher gets more interesting as i need to remember to include the* >> * MLO/u-boot.img somewhere in the ext4 partition for later flashing..* > > > Wait a minute, is this creating two partitions that are raw contents of > each file ? Not sure what this is doing actually seems more like you're > dumping the raw content of each file onto the same partition. But I've > actually never seen dd used this way. > > > On Tue, Sep 2, 2014 at 4:47 PM, Robert Nelson <robertcnel...@gmail.com> > wrote: > >> On Tue, Sep 2, 2014 at 6:45 PM, William Hermans <yyrk...@gmail.com> >> wrote: >> >> How would you guys feel about nuking that fat16 "boot" partition. ;) >> > >> > >> > Quite honestly Robert. It's been around since I first got my A5A last >> year, >> > so I'm used to it. But I suppose having one partition formatted as >> ext2/3/4 >> > would be more convenient >> >> done ;) >> >> dd if=MLO of=/dev/sdX count=1 seek=1 conv=notrunc bs=128k >> dd if=u-boot.img of=/dev/sdX count=2 seek=1 conv=notrunc bs=384k >> >> only works on omap4+ bootrom's (so the old omap34xx/omap36xx family is >> out) >> >> I'm close to rolling out a new testing image that uses this feature.. >> The flasher gets more interesting as i need to remember to include the >> MLO/u-boot.img somewhere in the ext4 partition for later flashing.. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
