rsync flashers? could you provide more info or link? Thanks
On Thursday, September 10, 2015 at 9:46:05 AM UTC-7, RobertCNelson wrote: > > On Thu, Sep 10, 2015 at 11:41 AM, Matt Maher Peterson > <matt.mahe...@hydro-care.com <javascript:>> wrote: > > Hi, > > > > I have a debian image I built with custom device tree and code that I > have > > created. I have copied and flashed this onto new beaglebones using this > > tool: > > > > http://elinux.org/BeagleBone_Black_Extracting_eMMC_contents > > > > This worked great untill a recent shipment of BBB REV C from element 14. > I > > can see a difference a between the two boards where the emmc chips are > > different the 'old rev c' has a kingston chip whereas the 'new rev c' > has a > > different one with a number 4LA18 JWA06 and M with a circle. > > > > When I use the tool mentioned above I get the proper led sequence tell > me > > the emmc is being flashed (blinking once a second, then goes solid when > > finished). On these new board the LED sequence starts off right but > goes > > solids very quickly and seemingly no image has been copied? > > > > What am I missing here?? > > Nand/eMMC vary in size, the current eMMC's being used range in sizes: > > #Micron 3744MB (bbb): 3925868544 bytes -> 3925.86 Megabyte > #Kingston 3688MB (bbb): 3867148288 bytes -> 3867.15 Megabyte > #Kingston 3648MB (bbb): 3825205248 bytes -> 3825.21 Megabyte > > dd based image tools can't handle this. Use the rsync "flashers"... > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
