Did not get uio driver up and running yet, is this still an issue on the 4.4 kernel? I did not see a confirmation reading this <https://groups.google.com/forum/#!category-topic/beagleboard/3iJ-J-x0-Ko> post either. Tried both loading via device tree (uio_pruss_enable) or plain insmod uio_pruss.
I wonder if using a 4.1 kernel a safer bet in that respect? On Wednesday, July 13, 2016 at 10:19:11 PM UTC+2, William Hermans wrote: > > By the way, TI's most recent kernels are purportedly supposed to use > either remoteproc, or uio_pruss. I say purportedly because I have not > personally experimented with that yet, but Robert made a post not long ago > about this. So it sounds like right off the bat, all you need to do is load > the PRU overlay file to get uio_pruss working. Or a slightly more involved > process to get remoteproc working. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a8f3c97d-28f9-4e0f-8c5f-fb5dbd1503cc%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.