Switching to using gpio-hog vs the regulators seem to have helped.. I'm about a dozen soft-reboot's into testing, so i pushed this
debian@beaglebone:~$ dmesg | grep wl [ 34.377974] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 34.507372] wlcore: loaded [ 34.909463] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 34.961172] wlcore: firmware booted (Rev 8.9.0.0.69) [ 34.989579] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 35.386337] wlcore: down [ 36.388055] wlcore: down [ 36.458640] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.488482] device wlan0 entered promiscuous mode [ 36.689006] tether: port 1(wlan0) entered forwarding state [ 36.694649] tether: port 1(wlan0) entered forwarding state https://github.com/RobertCNelson/ti-linux-kernel-dev/commit/eeb801eadd3ce8e5c22b803727499807fcdd9a84 i need to update the cm3-fw, then i'll tag this and push it out... Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgOmQHDpOGd3N5KQSk9rh7iDf5z%2BTiJyiQ2Jf75D78U8Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
