While we wait for the kernel to build and get pushed out via apt, you can run this to update the *.dtb's..
debian@beaglebone:~$ git clone -b 4.4-ti https://github.com/RobertCNelson/dtb-rebuilder Cloning into 'dtb-rebuilder'... remote: Counting objects: 7564, done. remote: Compressing objects: 100% (16/16), done. remote: Total 7564 (delta 4), reused 0 (delta 0), pack-reused 7547 Receiving objects: 100% (7564/7564), 5.12 MiB | 1.96 MiB/s, done. Resolving deltas: 100% (3507/3507), done. Checking connectivity... done. debian@beaglebone:~$ cd dtb-rebuilder/ debian@beaglebone:~/dtb-rebuilder$ make ; sudo make install and reboot.. Regards, On Wed, Sep 14, 2016 at 4:29 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > Switching to using gpio-hog vs the regulators seem to have helped.. > > I'm about a dozen soft-reboot's into testing, so i pushed this > > debian@beaglebone:~$ dmesg | grep wl > [ 34.377974] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) > [ 34.507372] wlcore: loaded > [ 34.909463] wlcore: PHY firmware version: Rev 8.2.0.0.236 > [ 34.961172] wlcore: firmware booted (Rev 8.9.0.0.69) > [ 34.989579] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 35.386337] wlcore: down > [ 36.388055] wlcore: down > [ 36.458640] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 36.488482] device wlan0 entered promiscuous mode > [ 36.689006] tether: port 1(wlan0) entered forwarding state > [ 36.694649] tether: port 1(wlan0) entered forwarding state > > https://github.com/RobertCNelson/ti-linux-kernel-dev/commit/eeb801eadd3ce8e5c22b803727499807fcdd9a84 > > i need to update the cm3-fw, then i'll tag this and push it out... > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjozUfLXah-LuKsXS-E0C2m3gGiEF4NbYAoDbNnk_rgmQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.