I also just realized, I posted this in the BBB group, not the BBB wireless one. It is a wireless BBB I just received the other day.
On Friday, December 16, 2016 at 10:52:27 PM UTC-5, Jay Doobie wrote: > > Thanks, that is really sweet looking! No matter what I do when I load my > DTO it doesn't seem to change the pinmux/ctrl values unfortunately. > Everything in dmesg, journalctl acts as if it worked successfully, but I > see no change to the pinmux/ctlr. Is there a kernel (or bone_capemgr) > level of debug? > > /Jason > >> >> > I have no idea what I did, but I'm back to nothing working and have been >> > unable to get the PRU working ( prussdrv_open(PRU_EVTOUT_0) fails in my >> > program), nor am I able to have my DTO configure the pinmux anymore. Is >> > there a way to increase debug levels so I can see what is going on when >> it >> > tries to load my DTO? >> >> there's a handy script under: >> >> /opt/scripts/device/bone/ >> >> sudo perl show-pins.pl >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/265b9483-7ba4-4ef5-a4bd-20a9cb91d84d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.