I have no idea what I did, but I'm back to nothing working and have been unable to get the PRU working ( prussdrv_open(PRU_EVTOUT_0) fails in my program), nor am I able to have my DTO configure the pinmux anymore. Is there a way to increase debug levels so I can see what is going on when it tries to load my DTO?
/jason On Friday, December 16, 2016 at 2:06:07 PM UTC-5, Jay Doobie wrote: > > Yeah, of course now the PRU died, which I had working before .....time to > debug that again :) > > On Friday, December 16, 2016 at 2:00:53 PM UTC-5, William Hermans wrote: >> >> >> >> On Fri, Dec 16, 2016 at 11:55 AM, Jay Doobie <doob...@gmail.com> wrote: >> >>> Ya know, I figured out what happened, I wish things were a bit better >>> documented, what you indicated above about creating the initramfs fixed >>> it. I believe what happened was I modifed the uEnv.txt file and thought it >>> took my changes, but it didn't. I was running still with HDMI enabled and >>> that conflicted with my DTS. >>> >>> I'll have to reassemble the machine now (I took the board out to put on >>> a scope), but the values in the pinmux/pins file look correct now. >>> >>> /Jason >>> >> >> Ah, yeah, that'll do it. One thing I always do when working with various >> things that take many commands to perform, and may easily be forgotten or >> messed up. Is to create a text file of exact steps I've done to achieve my >> end goal. Then when it comes to duplicating those steps, it turns into a >> copy paste session that usually succeeds. Which also gives me an easy way >> of creating a bash script later if needed. What just happened to you, >> forgetting ti disable the HDMI pins has happened to me before many times in >> the past . . . >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3a5682de-f144-45d7-905a-2e91f46ceab2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.