Thanks Robert, I already updated the kernel v4.9.x-ti to test it on a beaglebone I have here
I hope this also can solve the problem that sometimes the wifi does not work and only after several boot is fixed and Greg, thanks for the log's tips regards, Sebastián On Wednesday, June 28, 2017 at 1:56:04 PM UTC-4, RobertCNelson wrote: > > On Wed, Jun 28, 2017 at 12:51 PM, Robert Nelson <robert...@gmail.com > <javascript:>> wrote: > > On Wed, Jun 28, 2017 at 11:35 AM, Sebastián Sáez <otr...@gmail.com > <javascript:>> wrote: > >> Hi! > >> > >> I have some Beaglebone running my python script for controlling relays > and > >> read sensors. But time to time some beaglebone freeze and I don't know > why. > >> > >> Here is the log when the beaglebone crash. I think maybe it's a power > >> problem when the wifi chip try to connect. > >> > >> For power up the HW I use a Menwell powersupply and two solder wires to > the > >> BBGW pinheader (vdd_5v and gnd) > >> > >>> HW: Beaglebone Green Wireless > >>> > >>> Kernel: Linux beaglebone 4.4.9-ti-r25 > > > > "r25" is known broken Kernel on the BeagleBone Green Wireless. > > > > It took awhile, but we didn't figure out till mid Oct 2016, that one > > of the pin's on the wl1835 module needs to be pulled low on startup. > > Otherwise the wl1835 is actually entering a test mode on startup, thus > > ending up completely un-usable.. > > > > The fix was first pushed on Oct 20, 2016 with "4.4.24-ti-r58" > > > > So either, upgrade your kernel: > > > > cd /opt/scripts/tools/ > > git pull > > sudo ./update_kernel.sh > > > > or grab a newer image: > > > > > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Stretch_Snapshot_iot > > btw for up-time "reliability" i've been seeing much better uptime > performance with v4.9.x-ti, most cases they survive a week. (every 7-8 > days, i update the board's debian userspace and kernel and reboot) > > http://gfnd.rcn-ee.org:81/farm/uptime/ > > test-bbgw-* are the bbgw's... > > sudo ./update_kernel.sh --lts-4_9 > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7bc04a86-0503-4401-b28e-d96c7831d0aa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
