Nice option once i confirm that crown race is 26.4. Thanks!
On Dec 4, 2:36 pm, landotter <[EMAIL PROTECTED]> wrote:
> http://velo-orange.com/grcru1sebehe.html
>
> On Dec 4, 12:37 pm, Marc <[EMAIL PROTECTED]> wrote:
>
> > Hello
> > I've just bought a mid-80s Faggin frame/fork on eBay, built from
> > Columbus SLX tubing. It won't be coming with a headset and the seller
> > could tell me it has a 45mm stack height but couldn't give me crown
> > race diameter. Is this enough information to select a headset or do I
> > need to wait to receive the frame/fork to actually measure the crown
> > race diameter?
> > Sheldon indicates that Italian, ISO, and JIS 1" threaded headsets all
> > have the same 22.2mm stem ID on the steerer and the same frame cup OD
> > of 30.2mm, but the Italian crown race ID can be either 26.5 or 27.0mm,
> > vs. the 26.4mm of the ISO.
> > I'd like to find a moderate cost headset that will fit and that has
> > cartridge bearings (hoping to not have to spring for Chris King, and
> > that a Shimano 105 or similar will work).
> > May I assume that any headset with a stack height less than the 45mm
> > this frame has will work, with added spacers if needed?
> > Any advice or insights would be gratefully appreciated. Thank you.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Bicycle Lifestyle" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/bicyclelifestyle?hl=en
-~----------~----~----~----~------~----~------~--~---
