It normally will run during the next boot up cycle and may take quite a long time until it finishes. You will have no speech access at that point, but when it is done your system should start up in the regular manner. So take a walk and have dinner, you'll have the time. David Ferrin ow...@jaws-users.com I believe that tomorrow is another day, and I'll probably screw that one up too. ----- Original Message ----- From: "Mike & Barbara In Arcadia" <mb69ma...@charter.net> To: <blind-computing@jaws-users.com> Sent: Saturday, February 05, 2011 10:21 PM Subject: Re: [Blind-Computing] Message I get when I attempt to Defrag
Hi Alan; I copied the line, chkdsk drive letter: /f, into the run dialog box, hit enter, & nothing happened. I have absolutly no experience with CHKDSK, so if I didn't wrong please let me know. Thanks much. Take care. Mike ----- Original Message ----- From: Alan Robbins To: blind-computing@jaws-users.com Sent: Saturday, February 05, 2011 5:36 PM Subject: Re: [Blind-Computing] Message I get when I attempt to Defrag Mike, I would go ahead and run the chkdsk utility to ensure all is ok prior to defrag. You can do this while you are using your computer since it is not the drive with your operating system on it. What I do with my external and/or slave drives is the following: 1. bring up the run dialogue box 2. type the following line: chkdsk drive letter: /f I use the f switch to automatically correct any errors. This may take some time due to the size of the drive. Hope this helps Al -----Original Message----- From: blind-computing-boun...@jaws-users.com [mailto:blind-computing-boun...@jaws-users.com]On Behalf Of Mike & Barbara In Arcadia Sent: Saturday, February 05, 2011 8:17 PM To: Blind Computing Subject: [Blind-Computing] Message I get when I attempt to Defrag Hi All; I am attempting to defrag an 2TB Fantom / Micronet external hardrive but, I am receiving the following message. Disk Defragmenter Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: Arcadia (F:). Please run Chkdsk /f. OK I have never received this message before. What should I do? I am running XP Home with Jaws10 latest. All help will be greatly appreciated. Thanks much. Take care. Mike For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ Send any questions regarding list management to: blind-computing-ow...@jaws-users.com For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ Send any questions regarding list management to: blind-computing-ow...@jaws-users.com For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ Send any questions regarding list management to: blind-computing-ow...@jaws-users.com For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ Send any questions regarding list management to: blind-computing-ow...@jaws-users.com