Tom, As far as using the hammer drill he uses it alsowhen working with wood.He was putting some underlayment down and I questioned the use of the hammer drill. He informed me that using it he never had a screw head torn out. ----- Original Message ----- From: "Tom Hodges" <tomhod...@fuse.net> To: <blindhandyman@yahoogroups.com> Sent: Monday, November 30, 2009 9:48 AM Subject: RE: [BlindHandyMan] TapconR Concrete Screws- Stainless Steel Concrete Screws for fastening to concrete, brick and block
Lenny, I don't know the name of the special bit because I don't have the package anymore. I have never used a plain Phillips bit or a square bit, I have only used the combination bit and it works better than any screw I've ever used. It isn't for concrete so I wouldn't be using it with a hammer drill. The bits come in the box of screws, but it is a very short one and can not be held by my quick release chuck. But, I buy the longer bit at Lowes and they have them hanging on the shelf right next to the boxes of screws and they also have them where the rest of the screwdriver bits are sold. Regards, Tom H. From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com] On Behalf Of Lenny McHugh Sent: Monday, November 30, 2009 8:59 AM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] TapconR Concrete Screws- Stainless Steel Concrete Screws for fastening to concrete, brick and block Tom, The contractor friend that showed them to me uses a hammer drill. He told me that it never slips because when it gets tight it will go into hammer drilling motion. This will put the screw in with no slipping. Since I have neither I could not test his theory. As for the screws with both Phillips and square drive, I had two boxes and tossed them out. I destroyed a good Phillips screw driver. one of the sides was sheared off because there is only a very small portion that makes contact. Also a square drive bit tended to slip since the square pocket was not deep enough. Where did you locate the combination bit and is there a special name for it? --- Please visit my home page; it is motivational, inspirational and humorous with many resources for the blind. http://www.lennymchugh.com Lenny Please Copy and Paste into New Message to pass along. Use BCC line when addressing. Help stop identity theft. ----- Original Message ----- From: "Tom Hodges" <tomhod...@fuse.net <mailto:tomhodges%40fuse.net> > To: <blindhandyman@yahoogroups.com <mailto:blindhandyman%40yahoogroups.com> > Sent: Monday, November 30, 2009 8:48 AM Subject: RE: [BlindHandyMan] TapconR Concrete Screws- Stainless Steel Concrete Screws for fastening to concrete, brick and block I have used the Tapcon concrete screws quite often and have one big problem with them. The ones with the Phillips head are a problem because the screw bit rides up out of the screw when the screw becomes tight in the predrilled hole. I believe they would work a lot better if they had a drive like the screws I've been buying at Lowes lately. They are not concrete screws but they have a Phillips head with a square drive at the tip. In other words, you can use a Phillips bit, a square bit or for the most positive contact is there is a special bit that comes with screws that has both a Phillips bit with a square tip on it. With the special bit, the bit never rides up out of the screw. For those who are visually impaired, like me, who can't always hold the drill exactly perpendicular to the screw, this bit still holds. Although these screws are available only in exterior grade, I use them exclusively indoors because of the fact that don't allow slippage with the bit. Regards, Tom H. -----Original Message----- From: blindhandyman@yahoogroups.com <mailto:blindhandyman%40yahoogroups.com> [mailto:blindhandyman@yahoogroups.com <mailto:blindhandyman%40yahoogroups.com> ] On Behalf Of Lenny McHugh Sent: Wednesday, November 25, 2009 5:58 PM To: handyman-blind Subject: [BlindHandyMan] TapconR Concrete Screws- Stainless Steel Concrete Screws for fastening to concrete, brick and block Al, here is a little more information. I did not see the length choices. Probably somewhere else on the site. TapconR concrete screws are ideal for use in concrete, brick or block base material. The threads of the Tapcons actually cut threads into the base material - providing excellent holding values. The TapconR concrete screw comes in two diameters - 3/16" and 1/4", and two different head styles- hex washer head and flat counter sunk Phillips. The bit to use with each size of TapconR are: a.. 3/16" diameter TapconR = 5/32" bit b.. 1/4" diameter TapconR = 3/16" bit Each TapconR is coated with a Blue ClimasealR coating. This coating provides excellent rust resistance. Tapcons have also been tested in a salt spray environment for 720 hours with less than 10% red rust, per ASTM B117. The drivers to use with the different head style Tapcons are: a.. #2 Phillips - 3/16" Flat TapconR b.. 1/4" Socket - 3/16" Hex TapconR c.. #3 Phillips - 1/4" Flat TapconR d.. 5/16" Socket - 1/4" Hex TapconR http://www.concretescrews.com/ ------------------------------------ Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com <mailto:blindhandyman-owner%40yahoogroups.com> To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster <http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_ p> &PAGE_user_op=view_p age&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo <mailto:blindhandyman-help%40yahoogroups.comYahoo> ! Groups Links ------------------------------------ Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com <mailto:blindhandyman-owner%40yahoogroups.com> To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster <http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_ page&PAGE_id=33&MMN_position=47:29> &PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo <mailto:blindhandyman-help%40yahoogroups.comYahoo> ! Groups Links __________ NOD32 4648 (20091130) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com [Non-text portions of this message have been removed] ------------------------------------ Send any questions regarding list management to: blindhandyman-ow...@yahoogroups.com To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: blindhandyman-h...@yahoogroups.comyahoo! Groups Links __________ NOD32 4649 (20091130) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
